Inseaming Awls
-
- 1
- Posts: 31
- Joined: Sat Aug 13, 2011 9:00 am
- Full Name: blake dustin adams
- Location: FT Carson, Colorado, USA
Re: Inseaming Awls
Good news fellows, the group buy came in today. I have most of it packaged with the exception of an error in my math. I added up 5 short somehow so unless I've packaged some extra to somebody I'll get those 5 from my package when it gets here.
I didn't get in tonight until almost 7:30 so I haven't had a chance to get to the post office to get weights so I can find out how much shipping is but I should be able to do that tomorrow evening.
These actually aren't in boxes but folded paper so I'll also double check and make sure there are 50 in the packs but I don't think there should be a problem.
That being said expect a total price in the next day or two and we can have this all wrapped up.
BDA
I didn't get in tonight until almost 7:30 so I haven't had a chance to get to the post office to get weights so I can find out how much shipping is but I should be able to do that tomorrow evening.
These actually aren't in boxes but folded paper so I'll also double check and make sure there are 50 in the packs but I don't think there should be a problem.
That being said expect a total price in the next day or two and we can have this all wrapped up.
BDA
- dmcharg
- 5
- Posts: 258
- Joined: Tue May 17, 2011 9:00 am
- Full Name: Duncan McHarg
- Location: Clunes, Victoria, Australia
- Been Liked: 21 times
- Contact:
Re: Inseaming Awls
G'day Cody, Glad you liked it.
I've had one or two miss tempered and get too soft in the bend as well. You can, either, remove the awl from the haft, or rap a piece of wire around the haft (as a 'pan handle'), submerge the haft in a tub of cold water, and re-heat and re-temper.
Now for those who don't have lathes for making their hafts on, here's what I made for less than $10 and in around 4-5 hours. The hafts in my photo above were made on this, along with a lidded container for my wax, and lace bobbins for my mum. It's a large instructional picture I drew (hope admin doesn't mind. Heck, they can go away and make one too
).
I mention 45# fishing line, but lighter stuff will probably work fine, and flex better. Olive oil on the line will not cause it to slip. In fact it will give it a very long life (verses about 2 hours dry).
And you don't need fancy woodturners chisels with loooong handles. Any length one will do.
Cheers
Duncan
I've had one or two miss tempered and get too soft in the bend as well. You can, either, remove the awl from the haft, or rap a piece of wire around the haft (as a 'pan handle'), submerge the haft in a tub of cold water, and re-heat and re-temper.
Now for those who don't have lathes for making their hafts on, here's what I made for less than $10 and in around 4-5 hours. The hafts in my photo above were made on this, along with a lidded container for my wax, and lace bobbins for my mum. It's a large instructional picture I drew (hope admin doesn't mind. Heck, they can go away and make one too
![Image](http://www.thehcc.org/forum/images/old_smilies/happy.gif)
I mention 45# fishing line, but lighter stuff will probably work fine, and flex better. Olive oil on the line will not cause it to slip. In fact it will give it a very long life (verses about 2 hours dry).
And you don't need fancy woodturners chisels with loooong handles. Any length one will do.
Cheers
Duncan
You do not have the required permissions to view the files attached to this post.
- farmerfalconer
- 4
- Posts: 167
- Joined: Tue Nov 27, 2012 11:19 am
- Full Name: Cody Howdy
- Location: NC, USA
Re: Inseaming Awls
Fantastic! Actually I have been building one on and off for a year now. Still isnt perfect. tools are the big problem. I just havent gotten around to making them yet. This is new inspiration so Ill get back to work on it.
Thanks,
Cody
Thanks,
Cody
-
- 1
- Posts: 31
- Joined: Sat Aug 13, 2011 9:00 am
- Full Name: blake dustin adams
- Location: FT Carson, Colorado, USA
Re: Inseaming Awls
Alright all you that were on the group buy for the German awls that have paid I got your awls mailed out today so hopefully they'll get to you by the end of the week. Special thanks to those that rounded up as the USPS website didn't give me a true price but was only off by about 5-10 cents, that extra little bit covered where the website didn't give me the right price.
Alasdair I'm shooting you off an email after this.
BDA
Alasdair I'm shooting you off an email after this.
BDA
- dw
- Seanchaidh
- Posts: 5830
- Joined: Wed Jan 01, 1997 10:00 am
- Full Name: DWFII
- Location: Redmond, OR
- Has Liked: 204 times
- Been Liked: 122 times
- Contact:
Re: Inseaming Awls
Blake,
Thank you for doing this. I have run several Buyer's Consortia for the Guild and the membership of the Colloquy and I know that it is not easy.
I guess that's why it doesn't happen very often.
Again, thank you for your time and your energy.
Tight Stitches
DWFII--HCC Member
[center]Without "good" there is no "better," without "better," no "best."
And without the recognition that there is a hierarchy of excellence in all things, nothing rises above the level of mundane.[/center]
Thank you for doing this. I have run several Buyer's Consortia for the Guild and the membership of the Colloquy and I know that it is not easy.
I guess that's why it doesn't happen very often.
Again, thank you for your time and your energy.
Tight Stitches
DWFII--HCC Member
[center]Without "good" there is no "better," without "better," no "best."
And without the recognition that there is a hierarchy of excellence in all things, nothing rises above the level of mundane.[/center]
-
- 1
- Posts: 31
- Joined: Mon Oct 24, 2011 11:28 pm
- Full Name: Brooklyn_edie
- Location: brooklyn, ny, usa
Re: Inseaming Awls
BDA,
Thanks for the German awls. I got mine.
I wish I was lerned enough to know quality just by looking at them, but they do seem to be made of very good metal. I look forward to using them.
Much appreciate your efforts.
Edie
Thanks for the German awls. I got mine.
I wish I was lerned enough to know quality just by looking at them, but they do seem to be made of very good metal. I look forward to using them.
Much appreciate your efforts.
Edie
- athan_chilton
- 4
- Posts: 163
- Joined: Sun May 17, 2009 7:03 am
- Full Name: Athan Chilton
- Location: Urbana, IL, USA
Re: Inseaming Awls
BDA, I second Edie's thanks--looking forward to the luxury of knowing I have more than 2 inseaming awls!
-
- 1
- Posts: 39
- Joined: Mon Oct 15, 2012 11:52 am
- Full Name: Kimberlee Callaghan
- Location: Vancouver, Canada/Jerez de la Frontera, Spain
- Been Liked: 2 times
Re: Inseaming Awls
Hello:
I am wondering what size (length in inches) of inseaming awl, makes a hole size suitable for inseaming shoes. (Someone earlier said 2 mm, but I believe you are all making boots). I believe I will be using 3 strands of hemp. I am a beginner so I could be way off. My leather is around 4 ounces, I think. If there were some indication of the cross section each awl has at the widest point, I would have some idea without troubling you people, but I only see lengths.
I want to buy a box of 12 from Colin Barnsley and want to get a size that is at least in the right ballpark. Ordering individual ones from the US doesn't make economic sense, as I am on the other side of the ocean.
Thank you,
Ana Kim
I am wondering what size (length in inches) of inseaming awl, makes a hole size suitable for inseaming shoes. (Someone earlier said 2 mm, but I believe you are all making boots). I believe I will be using 3 strands of hemp. I am a beginner so I could be way off. My leather is around 4 ounces, I think. If there were some indication of the cross section each awl has at the widest point, I would have some idea without troubling you people, but I only see lengths.
I want to buy a box of 12 from Colin Barnsley and want to get a size that is at least in the right ballpark. Ordering individual ones from the US doesn't make economic sense, as I am on the other side of the ocean.
Thank you,
Ana Kim
- dw
- Seanchaidh
- Posts: 5830
- Joined: Wed Jan 01, 1997 10:00 am
- Full Name: DWFII
- Location: Redmond, OR
- Has Liked: 204 times
- Been Liked: 122 times
- Contact:
Re: Inseaming Awls
I don't know that it's so simple. I have inseaming and sewing awls (a less curves curved awl) in a number of sizes. From 3+ inches long to 1-1/4inch long.I use them nearly interchangeably. But when you're working with a thin insole you generally want an awl that is smaller.
I think that three strands of hemp is way too small for inseaming...which traditionally called for something more on the order of 8-10...but naturally, the idea is that the hole made with the awl will be small enough to make pulling both ends of your thread through somewhat difficult--maybe very difficult depending on your handwax and your technique. You want that resistance; you want the thread to fill the hole.
My best advice is to order a selection of awls maybe 2 or three of each length; or of each length in half inch increments. That way you'll not only be able to match the awl to your style, thread and medium but you'll have the flexibility to change up as needed.
I think that three strands of hemp is way too small for inseaming...which traditionally called for something more on the order of 8-10...but naturally, the idea is that the hole made with the awl will be small enough to make pulling both ends of your thread through somewhat difficult--maybe very difficult depending on your handwax and your technique. You want that resistance; you want the thread to fill the hole.
My best advice is to order a selection of awls maybe 2 or three of each length; or of each length in half inch increments. That way you'll not only be able to match the awl to your style, thread and medium but you'll have the flexibility to change up as needed.
DWFII--HCC Member
Instagram
Without "good" there is no "better," without "better," no "best."
And without the recognition that there is a hierarchy of excellence in all things, nothing rises above the level of mundane.
And without the recognition that there is a hierarchy of excellence in all things, nothing rises above the level of mundane.
-
- 3
- Posts: 95
- Joined: Fri Feb 05, 2010 10:00 am
- Full Name: Francis Classe
- Location: California
- Been Liked: 1 time
- Contact:
Re: Inseaming Awls
4oz seems quite lightweight for the insoles of shoes. Are you making light slippers? My insoles are routinely twice that thick, though my work is primarily historical.
Francis
http://www.raisedheels.com
Francis
http://www.raisedheels.com
- dw
- Seanchaidh
- Posts: 5830
- Joined: Wed Jan 01, 1997 10:00 am
- Full Name: DWFII
- Location: Redmond, OR
- Has Liked: 204 times
- Been Liked: 122 times
- Contact:
Re: Inseaming Awls
^+1
4oz isn't much more than 1/16 thick. 3 strands of hemp might make sense for that weight but you're in uncharted territory making an inseamed insole that thin. You almost need a cricket awl to inseam with.
Four ounce is more nearly a sockliner than an insole.
4oz isn't much more than 1/16 thick. 3 strands of hemp might make sense for that weight but you're in uncharted territory making an inseamed insole that thin. You almost need a cricket awl to inseam with.
Four ounce is more nearly a sockliner than an insole.
DWFII--HCC Member
Instagram
Without "good" there is no "better," without "better," no "best."
And without the recognition that there is a hierarchy of excellence in all things, nothing rises above the level of mundane.
And without the recognition that there is a hierarchy of excellence in all things, nothing rises above the level of mundane.
-
- 1
- Posts: 39
- Joined: Mon Oct 15, 2012 11:52 am
- Full Name: Kimberlee Callaghan
- Location: Vancouver, Canada/Jerez de la Frontera, Spain
- Been Liked: 2 times
Re: Inseaming Awls
Thank you for your advice. I will order a range. Sorry to be confusing: the insole is about 6 ounces - though even that is probably thin. I meant that the leather of the upper was about 4 oz.
-
- 3
- Posts: 107
- Joined: Mon Jun 01, 2009 8:10 am
- Full Name: John Lewis
- Location: Memphis, TN, USA
Re: Inseaming Awls
Just came across this on youtube. Never heard anyone say anything about such a tool. Can anyone tell me more? http://www.youtube.com/watch?v=TwH5GPzNVyQ
-
- 1
- Posts: 24
- Joined: Fri Mar 22, 2002 10:00 am
- Full Name: Richard Castellar
Re: Inseaming Awls
I can't get the vid to play! Anyone else having problems with it?johnl wrote:Just came across this on youtube. Never heard anyone say anything about such a tool. Can anyone tell me more? http://www.youtube.com/watch?v=TwH5GPzNVyQ
From what I can see of the time snaps, it looks like a tool to drive a curved awl through the holdfast. Does it do more than that?
What I can't understand is why a tool like that is needed. Is it so hard to use a hand awl?
-
- 3
- Posts: 107
- Joined: Mon Jun 01, 2009 8:10 am
- Full Name: John Lewis
- Location: Memphis, TN, USA
- dw
- Seanchaidh
- Posts: 5830
- Joined: Wed Jan 01, 1997 10:00 am
- Full Name: DWFII
- Location: Redmond, OR
- Has Liked: 204 times
- Been Liked: 122 times
- Contact:
Re: Inseaming Awls
I finally got the vid to play. It's interesting alright but it must take twice as long or longer to make one hole with the plyer than to make a hole with a Traditional inseaming awl.johnl wrote:Its interesting to me to see the ways people come up with to do things.
I admire ingenuity and innovation but like so many of these things if you resort to using such tools you cheat yourself of the fine motor control that you gain by learning to do it by hand. Control and skill that will serve you in good stead in every step of boot or shoemaking.
just my
![2cents :2cents:](./images/smilies/2cents.gif)
DWFII--HCC Member
Instagram
Without "good" there is no "better," without "better," no "best."
And without the recognition that there is a hierarchy of excellence in all things, nothing rises above the level of mundane.
And without the recognition that there is a hierarchy of excellence in all things, nothing rises above the level of mundane.
-
- Posts: 7
- Joined: Tue Jan 20, 2015 8:41 pm
- Full Name: Larry Peterson
- Been Liked: 1 time
Re: Inseaming Awls
Friend BLAKE.bdadamovicz » Tue Feb 05, 2013 9:53 pm wrote:Good news fellows, the group buy came in today. I have most of it packaged with the exception of an error in my math. I added up 5 short somehow so unless I've packaged some extra to somebody I'll get those 5 from my package when it gets here.
I didn't get in tonight until almost 7:30 so I haven't had a chance to get to the post office to get weights so I can find out how much shipping is but I should be able to do that tomorrow evening.
These actually aren't in boxes but folded paper so I'll also double check and make sure there are 50 in the packs but I don't think there should be a problem.
That being said expect a total price in the next day or two and we can have this all wrapped up.
BDA
I didn't get in on the awl purchase but I thought I would ask if there were any still available?. If not, is your source still selling inseamming awls?
Thank you, Larry Peterson
-
- 7
- Posts: 662
- Joined: Wed Mar 31, 2004 6:42 am
- Full Name: lance pryor
- Been Liked: 3 times
Re: Inseaming Awls
Larry:
FWIW, these awls were fairly small, not sure they are suitable for inseaming. I believe they are around 2.75" in length, definitely smaller than what I use for inseaming.
I bought 10 of these; I would be willing to part with a couple, if you're interested. Just let me know if you would like them.
Lance
FWIW, these awls were fairly small, not sure they are suitable for inseaming. I believe they are around 2.75" in length, definitely smaller than what I use for inseaming.
I bought 10 of these; I would be willing to part with a couple, if you're interested. Just let me know if you would like them.
Lance
- dw
- Seanchaidh
- Posts: 5830
- Joined: Wed Jan 01, 1997 10:00 am
- Full Name: DWFII
- Location: Redmond, OR
- Has Liked: 204 times
- Been Liked: 122 times
- Contact:
Re: Inseaming Awls
I bought a few of these too. I thought they were a bit small, as well, but curiously enough the older I get the smaller an awl I like. I've taken to "sharpening" all my older, larger awls to reduce the diameter and make the tip less of a blade and more of a point...ala German inseaming awls.lancepryor » Fri Jan 30, 2015 7:38 am wrote:Larry:
FWIW, these awls were fairly small, not sure they are suitable for inseaming. I believe they are around 2.75" in length, definitely smaller than what I use for inseaming.
I bought 10 of these; I would be willing to part with a couple, if you're interested. Just let me know if you would like them.
Lance
The smaller the hole in the insole, the tighter the stitch. That's the theory anyway.
DWFII--HCC Member
Instagram
Without "good" there is no "better," without "better," no "best."
And without the recognition that there is a hierarchy of excellence in all things, nothing rises above the level of mundane.
And without the recognition that there is a hierarchy of excellence in all things, nothing rises above the level of mundane.
-
- Posts: 7
- Joined: Tue Jan 20, 2015 8:41 pm
- Full Name: Larry Peterson
- Been Liked: 1 time
Re: Inseaming Awls
Lance, I would be interested!! Please email me your mailing address and how much to send to cover cost and shipping. Thank you for your generous offer.
Best wishes, Larry Peterson
Best wishes, Larry Peterson
-
- 7
- Posts: 662
- Joined: Wed Mar 31, 2004 6:42 am
- Full Name: lance pryor
- Been Liked: 3 times
Re: Inseaming Awls
Larry:
I sent you a PM but haven't heard back from you.
Let me know if you didn't get the message, or if you've changed your mind about these.
Lance
I sent you a PM but haven't heard back from you.
Let me know if you didn't get the message, or if you've changed your mind about these.
Lance
-
- Posts: 9
- Joined: Mon Feb 02, 2015 7:50 am
- Full Name: Graham Ebner
Re: Inseaming Awls
Fellows,
Hopefully this is the right place to post this,
I'm looking for an inseaming awl, my first. I'll be working solely (solely, ha!) on men's boots. I believe I'm looking for something like a #2, but I'm also interested in a few lengths/sizes if anyone has some for sale.
I've been scouring eBay but no luck, thus far. I definitely know of Dick Anderson's awls but I'd like to find a used one or two before I treat myself to one of his.
Thanks!
Hopefully this is the right place to post this,
I'm looking for an inseaming awl, my first. I'll be working solely (solely, ha!) on men's boots. I believe I'm looking for something like a #2, but I'm also interested in a few lengths/sizes if anyone has some for sale.
I've been scouring eBay but no luck, thus far. I definitely know of Dick Anderson's awls but I'd like to find a used one or two before I treat myself to one of his.
Thanks!
-
- Posts: 2
- Joined: Mon May 11, 2015 7:12 am
- Full Name: Kiran Vallabh
- Location: South Africa
Re: Inseaming Awls
Hi everyone, I am new to the forum.
I have some German awl blades(Platt-Ahlen) and also (King of awls)
If anyone is interested please send me an email.
A leather company closed down in South Africa and I bought the lot.
![tip of th ehat :tiphat:](./images/smilies/tipofthehat.gif)
I have some German awl blades(Platt-Ahlen) and also (King of awls)
If anyone is interested please send me an email.
A leather company closed down in South Africa and I bought the lot.
- dw
- Seanchaidh
- Posts: 5830
- Joined: Wed Jan 01, 1997 10:00 am
- Full Name: DWFII
- Location: Redmond, OR
- Has Liked: 204 times
- Been Liked: 122 times
- Contact:
Re: Inseaming Awls
If you have photos and descriptions, by all means post them.
DWFII--HCC Member
Instagram
Without "good" there is no "better," without "better," no "best."
And without the recognition that there is a hierarchy of excellence in all things, nothing rises above the level of mundane.
And without the recognition that there is a hierarchy of excellence in all things, nothing rises above the level of mundane.
-
- Posts: 2
- Joined: Mon May 11, 2015 7:12 am
- Full Name: Kiran Vallabh
- Location: South Africa
Re: Inseaming Awls
Please see pictures as requested.
If there is a requirement for further pictures with different sizes please let know.
If there is a requirement for further pictures with different sizes please let know.
You do not have the required permissions to view the files attached to this post.