Tools and equipment for sale
-
- 3
- Posts: 115
- Joined: Mon Mar 07, 2005 1:00 pm
- Full Name: Larry Waller
- Location: Delavan, Wisconsin, USA
- Been Liked: 1 time
- Contact:
Re: Tools and equipment for sale
To All
I have just listed on ebay a bench top Commercially Mfg Spray booth/Fume hood 25"W 17"T 18"D 30" including blower 4" outlet Like new used very little . Would be perfect for Shop use Spray dyeing and Glueing .Here is the link http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ih=013&item=230037676255&rd=1&sspa gename=STRK%3AMESE%3AIT&rd=1 if you dont have an exhaust system in your shop you should ,just for your own peace of mind .
Good luck
Larry Waller
www.Walrusshoe.com
I have just listed on ebay a bench top Commercially Mfg Spray booth/Fume hood 25"W 17"T 18"D 30" including blower 4" outlet Like new used very little . Would be perfect for Shop use Spray dyeing and Glueing .Here is the link http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ih=013&item=230037676255&rd=1&sspa gename=STRK%3AMESE%3AIT&rd=1 if you dont have an exhaust system in your shop you should ,just for your own peace of mind .
Good luck
Larry Waller
www.Walrusshoe.com
Re: Tools and equipment for sale
I just got this from Hide House - I've blanked out the prices, but I thought people might be interested in the Poly cutting boards, they're bigger than you usually get.
OUR SAN DIMAS WAREHOUSE IS OFFERING THE FOLLOWING SPECIALS. PLEASE ORDER DIRECTLY FROM THEM AT sales@hidehousesouth.com or by phone 1 866 527 5467 Please visit our all new website for leathers & all of our new hardware & tool section!! 1) #9050 lining grade pig split-red, Loden,desert..***** ft. 2)#9090 mahogany 4/5 oz cowhide splits 9 ft avg-may contain brands....$**** ft. 3)#9400whbu-White buffalo,whole hide 4 oz for garments & bags....$**** ft 4) #9275met Silver or Gold metallic foiled lamb-very soft...$**** ft. 5) #9225Bull 9/10 oz low grade veg tanned double shoulders... $**** ft.. 6) #69, #92, #138 Black bonded nylon thread. 1 lb. put-ups... $***** per lb.. 7) #TLBOARDS96, 4 FT x 8FT table top poly cutting boards....$***** each 8) 3TLBOARD48, 4FT x 4FT poly cutting boards.....$***** each
More power to y'awl
T.
OUR SAN DIMAS WAREHOUSE IS OFFERING THE FOLLOWING SPECIALS. PLEASE ORDER DIRECTLY FROM THEM AT sales@hidehousesouth.com or by phone 1 866 527 5467 Please visit our all new website for leathers & all of our new hardware & tool section!! 1) #9050 lining grade pig split-red, Loden,desert..***** ft. 2)#9090 mahogany 4/5 oz cowhide splits 9 ft avg-may contain brands....$**** ft. 3)#9400whbu-White buffalo,whole hide 4 oz for garments & bags....$**** ft 4) #9275met Silver or Gold metallic foiled lamb-very soft...$**** ft. 5) #9225Bull 9/10 oz low grade veg tanned double shoulders... $**** ft.. 6) #69, #92, #138 Black bonded nylon thread. 1 lb. put-ups... $***** per lb.. 7) #TLBOARDS96, 4 FT x 8FT table top poly cutting boards....$***** each 8) 3TLBOARD48, 4FT x 4FT poly cutting boards.....$***** each
More power to y'awl
T.
Re: Tools and equipment for sale
For what it's worth, I was just surfing e-bay and saw an "American Straight Arrow" machine for sale in Kentucky. Just search for the quotes and see if you need this beast. There are no bids so far and he wants you to pick it up. I'm not affiliated, I live in FL. I might be interested but the 300 bucks for fuel and three days drive makes it less appealing.
- sorrell
- 6
- Posts: 320
- Joined: Thu Jun 16, 2005 12:00 pm
- Full Name: Lisa Sorrell
- Location: Guthrie, OK
- Been Liked: 10 times
- Contact:
Re: Tools and equipment for sale
Here are some old tools that I have for sale. If you have questions about any or would like to see a picture of an individual tool just let me know. The lasting pliers are in bad shape, with the exception of #9, which is in fair to middlin' condition.
Lisa
Lisa
You do not have the required permissions to view the files attached to this post.
Re: Tools and equipment for sale
To all,
I have a number of pieces of equipment available for sale here in Chicago. I will need them to be on their way to new homes before June first. Please call or e-mail me for more information: erickw @ riotgeer . com (312) 455-0064
Some pieces may have homes, but not for certain, I'm including pictures of some, but not all machines.
Thank you,
Erick
American Sole press:
Landis 12K:
Bottom feed skiving machine:
5-in-1
Sutton S-750 Finisher:
Landis splitter
Heel Wheel
Comelz thermofolder:
Singer 31-15 w/ roller feed
Pfaff post machine w/ powered roller feed:
Singer 29k60
Unopened razorsharp system
Jet 12” disc sander
I have a number of pieces of equipment available for sale here in Chicago. I will need them to be on their way to new homes before June first. Please call or e-mail me for more information: erickw @ riotgeer . com (312) 455-0064
Some pieces may have homes, but not for certain, I'm including pictures of some, but not all machines.
Thank you,
Erick
American Sole press:
Landis 12K:
Bottom feed skiving machine:
5-in-1
Sutton S-750 Finisher:
Landis splitter
Heel Wheel
Comelz thermofolder:
Singer 31-15 w/ roller feed
Pfaff post machine w/ powered roller feed:
Singer 29k60
Unopened razorsharp system
Jet 12” disc sander
You do not have the required permissions to view the files attached to this post.
-
- 2
- Posts: 58
- Joined: Sat Apr 21, 2007 9:00 am
- Full Name: proxy posting
- Been Liked: 5 times
Re: Tools and equipment for sale
My husband and I bought shoemaing tools about 12 years ago when allot of the shoe makers where closing in PA and I had dream of making shoes and cowboy boots.
My husband is a sculpture and use them occasionally and I am a goldsmith and found that I can make more money with my jewelry (which is still my first love, the cowboy boots are my obsession.)
Over the years we have found we don't use some of the tools and we need the space.
I would love to get them in the hands of someone who would use them it is a shame to have good tools sit.
We have a:
Landis 12 - curve needle stitcher
Jackmaster
Fortuna SAS - skiver.
All are in good working order.
or know anyone who is interested please feel free to pass on my email or phone number.
Thank you
hope to hear from you soon.
Lauren
Lauren Schott
410-889-4745
www.LaurenSchott.com
lauren@laurenschott.com
My husband is a sculpture and use them occasionally and I am a goldsmith and found that I can make more money with my jewelry (which is still my first love, the cowboy boots are my obsession.)
Over the years we have found we don't use some of the tools and we need the space.
I would love to get them in the hands of someone who would use them it is a shame to have good tools sit.
We have a:
Landis 12 - curve needle stitcher
Jackmaster
Fortuna SAS - skiver.
All are in good working order.
or know anyone who is interested please feel free to pass on my email or phone number.
Thank you
hope to hear from you soon.
Lauren
Lauren Schott
410-889-4745
www.LaurenSchott.com
lauren@laurenschott.com
-
- 1
- Posts: 28
- Joined: Sun Oct 24, 2010 9:00 am
- Full Name: Sharon Raymond
- Location: Shutesbury, MA, 01072
- Contact:
Re: Tools and equipment for sale
Greetings, I have 20 sheets of 1/2 inch thick natural plantation crepe, about 18"x36", half in honey color, half in black, that I will not be using. If anyone has any interest in this, please contact me via my email (sharon@simpleshoemaking.com) . If you can think of a use for it in some other "industry", I would appreciate hearing of it. Thanks, Sharon
-
- 1
- Posts: 28
- Joined: Sun Oct 24, 2010 9:00 am
- Full Name: Sharon Raymond
- Location: Shutesbury, MA, 01072
- Contact:
Re: Tools and equipment for sale
Greetings, I have decided to get rid of the Tippmann Aerostitch that I have been using to do the outstitching on the shoes I make, using 138-207 thread. I love the way the speed can be reduced and the stitching in general, but when something does go wrong there is no one who can repair it outside of Fort Wayne, Indiana - that I know of. Anyone interested in it? I am wondering if anyone has feedback on the Toledo Sewing Machines "Cowboy model #3500", heavy duty leather stitcher. Or maybe there is another machine I should be using, I saw a photo of an Irish outstitcher using a machine that stitched the shoe upside down. I would appreciate any feedback, Sharon
Re: Tools and equipment for sale
Hey all,
I still have equipment for sale.
I am holding a sale Monday, Tuesday and Wednesday to sell extra leathers and tools, including Shoe repair items, I am attaching a flier.
A complete list can be e-mailed- I have sold a few items previously listed.
The American Shoe Machinery Sole press is still available, useful for forming insoles and attaching soles. Very reasonable price, but heavy.
The Comelz Thermo folder is good for anyone thinking of getting into manufacturing.
Erick
I still have equipment for sale.
I am holding a sale Monday, Tuesday and Wednesday to sell extra leathers and tools, including Shoe repair items, I am attaching a flier.
A complete list can be e-mailed- I have sold a few items previously listed.
The American Shoe Machinery Sole press is still available, useful for forming insoles and attaching soles. Very reasonable price, but heavy.
The Comelz Thermo folder is good for anyone thinking of getting into manufacturing.
Erick
You do not have the required permissions to view the files attached to this post.
-
- 5
- Posts: 206
- Joined: Fri Sep 22, 2006 9:00 am
- Full Name: Tom Mattimore
Re: Tools and equipment for sale
To all
I am selling a set of straight lasts that I obtained from from my friend Bill Tippet some years ago. I will offer them here first before I e-bay them. There is only one of each as they are straight. Please contact for pics and details.
tom@civilwarboots.com
Tom
I am selling a set of straight lasts that I obtained from from my friend Bill Tippet some years ago. I will offer them here first before I e-bay them. There is only one of each as they are straight. Please contact for pics and details.
tom@civilwarboots.com
Tom
Re: Tools and equipment for sale
I have some items I didn't list before.
If anyone is in the area, I have quite a few rubber soles and half-soles.
If anyone uses Barbour Storm-welt, I have yardage of Mahogany and Black (I understand that black is sometimes hard to come-by)I want to sell in bundles, and I can't remember how much I bought it directly from Barbour for.
Bench-top Spray booth, approximately 12" deep by 20-24" wide with vertical duct.
Must be short tonight.
Erick
If anyone is in the area, I have quite a few rubber soles and half-soles.
If anyone uses Barbour Storm-welt, I have yardage of Mahogany and Black (I understand that black is sometimes hard to come-by)I want to sell in bundles, and I can't remember how much I bought it directly from Barbour for.
Bench-top Spray booth, approximately 12" deep by 20-24" wide with vertical duct.
Must be short tonight.
Erick
-
- 1
- Posts: 17
- Joined: Tue Jan 23, 2007 10:00 am
- Full Name: susan collard
- Location: Surrey, BC, Canada
Re: Tools and equipment for sale
Hi all
Just a quick "heads up"...I was talking with Philip at Lonsdale Leather (www.indigoleather.com) and he is selling off a couple of Pfaff flatbed machines he has been using. I think they are walking foot machines but we didn't get into details. If anyone is interested, just contact him directly and bargain wildly.
As a quick PS I also took at look at his croc and kangaroo - both nice, at least in my relatively uninformed opinion.
Hope you are all doing well
Sue
Just a quick "heads up"...I was talking with Philip at Lonsdale Leather (www.indigoleather.com) and he is selling off a couple of Pfaff flatbed machines he has been using. I think they are walking foot machines but we didn't get into details. If anyone is interested, just contact him directly and bargain wildly.
As a quick PS I also took at look at his croc and kangaroo - both nice, at least in my relatively uninformed opinion.
Hope you are all doing well
Sue
- sorrell
- 6
- Posts: 320
- Joined: Thu Jun 16, 2005 12:00 pm
- Full Name: Lisa Sorrell
- Location: Guthrie, OK
- Been Liked: 10 times
- Contact:
Re: Tools and equipment for sale
For sale:
Landis McKay Model 88
Landis 21-L Curved Needle
Both are in good working condition.
Contact: Brian Allison, 405-293-0007
Landis McKay Model 88
Landis 21-L Curved Needle
Both are in good working condition.
Contact: Brian Allison, 405-293-0007
-
- Posts: 1
- Joined: Sun Aug 12, 2007 9:00 am
- Full Name: Billy Lloyd
- Location: UK
Re: Tools and equipment for sale
Greetings Bootmakers,
I have a Junker & Ruh Hand Sole Stitching machine Type SD 28, complete with parts list, and full operating instructions. I bought it 30 years ago when I worked with heavy horses, and used it for repairing harness until the needle broke. I think the bobbin is worn, but the machine is functional if you can get the needles. It needs a clean up and lubrication, as it was last used in 1984, but has been kept dry. I can make no guarantees, but it is offerred in good faith and I feel cofident that it has a useful life in front of it.
I would now like to sell the machine, though I have no idea of value. I would like it to go somewhere where it will be used. Please note that I am in Cumbria, UK, so overseas shipping may be prohibitively expensive.
The best offer will be accepted. Shipping would be charged at cost.
Bill Lloyd
(0) 1539 824008 will@georgelloyd.com
www.georgelloyd.com
(Message edited by billyb on August 12, 2007)
(Message edited by billyb on August 12, 2007)
I have a Junker & Ruh Hand Sole Stitching machine Type SD 28, complete with parts list, and full operating instructions. I bought it 30 years ago when I worked with heavy horses, and used it for repairing harness until the needle broke. I think the bobbin is worn, but the machine is functional if you can get the needles. It needs a clean up and lubrication, as it was last used in 1984, but has been kept dry. I can make no guarantees, but it is offerred in good faith and I feel cofident that it has a useful life in front of it.
I would now like to sell the machine, though I have no idea of value. I would like it to go somewhere where it will be used. Please note that I am in Cumbria, UK, so overseas shipping may be prohibitively expensive.
The best offer will be accepted. Shipping would be charged at cost.
Bill Lloyd
(0) 1539 824008 will@georgelloyd.com
www.georgelloyd.com
(Message edited by billyb on August 12, 2007)
(Message edited by billyb on August 12, 2007)
Re: Tools and equipment for sale
I have a few machines for sale
Groge Knight crimper, fortuna 16 inch band splitter,8 inch usm sole splitter,a vamp steamer,Boot Last you name it and I have full runs, We have for sale MPCS computerized pattern stitchers for sewing in the top patterns of western cowboy boots. - USM Toe Last Rapid - Back Part Molder GSM usm 3TH - Seat & Waist Last USM BUHL-BM - Auto Cementer USM ABC-2 - Sole Press American NC505 - Clase patcher - Crimper with heat for shoes or boots - Fortuna splitter AN 400-E. We have for sale: 1, Camoga 18 inch 480 band knife splitter - 1.Fortuna 18 inch band knife splitter - 1.Fortuna 16 inch ANE 400 band knife splitter with toe split - 1.Fortuna AN 400 band knife splitter - 2. 3 1/2 standard auto spot setters - 5. Adler 205-370 Cyl. arms with stands - 1.Adler 205-374 flat bed with stands - 1. Jiffy rivet auto. setter - 1. Randall enbosser - 1. Randall 12 inch strap cutter top knife quick change cabinet model 1.Landis # 3 stitcher 1. Landis # 16 stitcher 1.Pro 2000 cyl arm with stand 1.Atom small 8 ton clicker 1. ormount travel head clicker with a 24X24 head 1.Uinon lock - 1. Singer 9710 - 1.Atom 999 clicker with 24 wide head - 1. Schwab 35 ton clicker with brace arms with a 30X40 head - 1. 75 ton schweb beam press - 1. programmable skiver - 1. Randall R-75 retrim machine - 1. Camoga Band knife splitter model 412 16" inch - 1. Camoga 450 splitter 18" inch. Feel free to contact us for more detailed information.
USA Leather Machinery
Contact: JJ
3301, Devault Bridge Road, 37686 Piney Flats (USA)
Tel: 1 4235711364
E-mail:oldcowpoke@charter.net
Groge Knight crimper, fortuna 16 inch band splitter,8 inch usm sole splitter,a vamp steamer,Boot Last you name it and I have full runs, We have for sale MPCS computerized pattern stitchers for sewing in the top patterns of western cowboy boots. - USM Toe Last Rapid - Back Part Molder GSM usm 3TH - Seat & Waist Last USM BUHL-BM - Auto Cementer USM ABC-2 - Sole Press American NC505 - Clase patcher - Crimper with heat for shoes or boots - Fortuna splitter AN 400-E. We have for sale: 1, Camoga 18 inch 480 band knife splitter - 1.Fortuna 18 inch band knife splitter - 1.Fortuna 16 inch ANE 400 band knife splitter with toe split - 1.Fortuna AN 400 band knife splitter - 2. 3 1/2 standard auto spot setters - 5. Adler 205-370 Cyl. arms with stands - 1.Adler 205-374 flat bed with stands - 1. Jiffy rivet auto. setter - 1. Randall enbosser - 1. Randall 12 inch strap cutter top knife quick change cabinet model 1.Landis # 3 stitcher 1. Landis # 16 stitcher 1.Pro 2000 cyl arm with stand 1.Atom small 8 ton clicker 1. ormount travel head clicker with a 24X24 head 1.Uinon lock - 1. Singer 9710 - 1.Atom 999 clicker with 24 wide head - 1. Schwab 35 ton clicker with brace arms with a 30X40 head - 1. 75 ton schweb beam press - 1. programmable skiver - 1. Randall R-75 retrim machine - 1. Camoga Band knife splitter model 412 16" inch - 1. Camoga 450 splitter 18" inch. Feel free to contact us for more detailed information.
USA Leather Machinery
Contact: JJ
3301, Devault Bridge Road, 37686 Piney Flats (USA)
Tel: 1 4235711364
E-mail:oldcowpoke@charter.net
-
- Posts: 3
- Joined: Wed Oct 17, 2007 10:47 am
- Full Name: John Stumpf
- Location: Blairsville, PA, USA
- Contact:
Re: Tools and equipment for sale
I have a few Machines for sale:
First is an Adler Hi-Post Double Needle. MOdel 68-202s. This Machine has seen almost no use. It is a head only sale, but I can get tables and motors for an additional charge.
Second is an Adler 30-10 Long Arm Patch Machine. The machine has been reconditioned and has the original paint. It is also a head only sale.
Third is a reconditioned Singer 29-4. This machine Has the original Paint and includes the stand.
Please Contact me for pricing.
Also I had 2 Singer 211's for sale, the were taken from under false pretenses. If I ever recieve them back, I will offer them for sale. The party involved has made mo effort to resolve the matter.
Thanks for looking
John Stumpf
JCL Leather Machinery
724-459-6802
www.jclleather.com
www.jclleathermachinery.com
jdstumpf@verizon.net
jrstumpf@netzero.net
First is an Adler Hi-Post Double Needle. MOdel 68-202s. This Machine has seen almost no use. It is a head only sale, but I can get tables and motors for an additional charge.
Second is an Adler 30-10 Long Arm Patch Machine. The machine has been reconditioned and has the original paint. It is also a head only sale.
Third is a reconditioned Singer 29-4. This machine Has the original Paint and includes the stand.
Please Contact me for pricing.
Also I had 2 Singer 211's for sale, the were taken from under false pretenses. If I ever recieve them back, I will offer them for sale. The party involved has made mo effort to resolve the matter.
Thanks for looking
John Stumpf
JCL Leather Machinery
724-459-6802
www.jclleather.com
www.jclleathermachinery.com
jdstumpf@verizon.net
jrstumpf@netzero.net
-
- 1
- Posts: 13
- Joined: Fri May 04, 2007 9:00 am
- Full Name: daphne board
- Location: Holyoke, Massachusetts, USA
- Contact:
Re: Tools and equipment for sale
I would love to give away two heavy (oh yes very heavy) pieces of machinery.
They will most likely end up as scrap within the next year or so, unless someone would love to come to my shop and haul them away. I am sure this is a familiar story!
My line finisher: a goodyear, ancient, works well, but I have a smaller finisher now. It is about ten feet long, and I think it dates from the forties...
An outsole stitcher: newer, but not that new! I haven't used it ever, but I believe that anyone who can see its inner beauty (under a layer of grime) will love it. Probably a sixties model. The head has been detached for easier transport.
I know this is an outside chance (how many of us want more heavy old machinery?), but if anyone is interested, let me know! I can provide photos.
Thanks,
Daphne
They will most likely end up as scrap within the next year or so, unless someone would love to come to my shop and haul them away. I am sure this is a familiar story!
My line finisher: a goodyear, ancient, works well, but I have a smaller finisher now. It is about ten feet long, and I think it dates from the forties...
An outsole stitcher: newer, but not that new! I haven't used it ever, but I believe that anyone who can see its inner beauty (under a layer of grime) will love it. Probably a sixties model. The head has been detached for easier transport.
I know this is an outside chance (how many of us want more heavy old machinery?), but if anyone is interested, let me know! I can provide photos.
Thanks,
Daphne
-
- 1
- Posts: 13
- Joined: Fri May 04, 2007 9:00 am
- Full Name: daphne board
- Location: Holyoke, Massachusetts, USA
- Contact:
Re: Tools and equipment for sale
Oops! It appears that I have neglected to post where my shop is located. Sorry about that!
I am near Springfield, Mass., halfway between NYC and Boston.
I am near Springfield, Mass., halfway between NYC and Boston.
-
- 2
- Posts: 58
- Joined: Sat Apr 21, 2007 9:00 am
- Full Name: proxy posting
- Been Liked: 5 times
Re: Tools and equipment for sale
For Sale:
two (2) bootmaker's last stands
one (1) Pfaff post machine, roller foot (not driven), good condition, complete with table, motor, etc..
two (2) 1953 Chevy corner windows
one (1) Singer long arm sewing machine, large bobbin, on treadle stand
one (1) shoe repair jack stand
one (1) AutoSoler Finisher, 24" wide, 4" belts, w/brushes
one (1) 31K Singer flatbed machine
one (1) Landis heel base attacher.
Contact Vern Theroux for prices or more information...toll free at 1.877.656.5115
two (2) bootmaker's last stands
one (1) Pfaff post machine, roller foot (not driven), good condition, complete with table, motor, etc..
two (2) 1953 Chevy corner windows
one (1) Singer long arm sewing machine, large bobbin, on treadle stand
one (1) shoe repair jack stand
one (1) AutoSoler Finisher, 24" wide, 4" belts, w/brushes
one (1) 31K Singer flatbed machine
one (1) Landis heel base attacher.
Contact Vern Theroux for prices or more information...toll free at 1.877.656.5115
-
- 2
- Posts: 59
- Joined: Sat Feb 10, 2007 10:00 am
- Full Name: John Ralston
- Location: Colbert, WA
- Contact:
Re: Tools and equipment for sale
Looking for a Line Finisher in the Portland, OR area - something along the lines of an old Landsis or Sutton 400.
Thanks,
John
jjdralston at AOL
Thanks,
John
jjdralston at AOL
Re: Tools and equipment for sale
John,
You might give Oregon leather a call and ask for Rick or Jim they might be able to help.
Mike
You might give Oregon leather a call and ask for Rick or Jim they might be able to help.
Mike
-
- 2
- Posts: 59
- Joined: Sat Feb 10, 2007 10:00 am
- Full Name: John Ralston
- Location: Colbert, WA
- Contact:
-
- 1
- Posts: 13
- Joined: Fri May 04, 2007 9:00 am
- Full Name: daphne board
- Location: Holyoke, Massachusetts, USA
- Contact:
Re: Tools and equipment for sale
Hey there-
An update on my equipment that I was giving away in November:
I no longer have my antique finishing machine and outsole stitcher...hooray! My house is more tidy.
Thanks,
Daphne
An update on my equipment that I was giving away in November:
I no longer have my antique finishing machine and outsole stitcher...hooray! My house is more tidy.
Thanks,
Daphne
-
- 2
- Posts: 59
- Joined: Sat Feb 10, 2007 10:00 am
- Full Name: John Ralston
- Location: Colbert, WA
- Contact:
Re: Tools and equipment for sale
Mike,
Great tip - although I asked a bit late - Rick didn't have anything available, but mentioned that a guy 45 min. north of here just gave away an old Sutton because nobody would give him any $$ for it!!
I will keep looking.
Great tip - although I asked a bit late - Rick didn't have anything available, but mentioned that a guy 45 min. north of here just gave away an old Sutton because nobody would give him any $$ for it!!
I will keep looking.
Re: Tools and equipment for sale
Old shoe shop equipment for sale in Pawtucket, RI. Machines have been in storage for about 35 years, some have had some use.
2 cutters:
Landis line finisher:
2 Jack stands, metal feet on top of line sander picture:
Singer 29-4:
Singer 17-23:
Singer 42-5:
unknown model singer:
2 units; Landis 12:
Landis 36:
Champion stitcher:
United Shoe Repairing Machines Staple Fastener: (seemed like a pre-autosoler)
About 450 pairs of wooden lasts, some sorted by pairs.
Rotating press with 5 heated press beds:
Contact seller El by email: jacobhillinn@msn.com
Also many materials, pre-cut counters, pre-formed counters, soles, some leather, heels and more. Contact El for detials.
First come first serve.
(Message edited by relferink on March 17, 2008)
2 cutters:
Landis line finisher:
2 Jack stands, metal feet on top of line sander picture:
Singer 29-4:
Singer 17-23:
Singer 42-5:
unknown model singer:
2 units; Landis 12:
Landis 36:
Champion stitcher:
United Shoe Repairing Machines Staple Fastener: (seemed like a pre-autosoler)
About 450 pairs of wooden lasts, some sorted by pairs.
Rotating press with 5 heated press beds:
Contact seller El by email: jacobhillinn@msn.com
Also many materials, pre-cut counters, pre-formed counters, soles, some leather, heels and more. Contact El for detials.
First come first serve.
(Message edited by relferink on March 17, 2008)
You do not have the required permissions to view the files attached to this post.