Page 21 of 67
Re: The Gallery
Posted: Wed Sep 09, 2009 6:45 pm
by jkrichard
9993.jpg
9994.jpg
These boots were actually great fun. Hand-stitched sole welt using the spinning/goiser stitch, good first attempt at hiding the bottom of the stitch line. Inked and burnished bottoms, Cuban heel. Waxy calf tops and vamps, lambskin liner for both tops and vamps...also, probably the last time I use lamb for a vamp liner (we all have our demons, lamb vamp liners just happens to be mine).
I actually hate to see these go, the owner of them is lucky she's a last size smaller than mine. O.o
Re: The Gallery
Posted: Thu Sep 10, 2009 10:40 am
by dearbone
Here is a two piece Derby,front and back,made deep(high) to accommodate full, thick orthopedics insert which takes away the romance out of shoe making, The upper is sewn to insole all around using single row stitch on strip of leather and folded.
9998.jpg
Nasser Vies
HCC-Member
Re: The Gallery
Posted: Fri Sep 11, 2009 2:59 pm
by kieran_ionescu
Sorry Again. Hopefully the last time.
10022.jpg
Re: The Gallery
Posted: Tue Sep 15, 2009 9:50 pm
by dmcharg
G'day Everyone,
I don't get on here very much
; I am, after too many years off from doing paid orders, now going back to as close to full time as I can with my boot & shoemaking
. Starting off with the family (6 of us) to get my hand back in and warm up, here is a prototype I'm making for myself (hence the presence of scars that I wouldn't allow otherwise). The two halves overlap each other to automaticaly make the heel and toe counters.
Cheers
Duncan
10089.jpg
10090.jpg
10091.jpg
Re: The Gallery
Posted: Wed Sep 16, 2009 3:01 pm
by jkrichard
I can't decide if it's the sheriff, or an outlaw...
10093.jpg
10094.jpg
10″ stovepipes with a 3/4 bottom welt. Oil tan tops with dyed silhouette. Bullhide vamps and counters. Matching heel stain and bottom finish. I’ll be breaking these in ’round Branson, MO tomorrow, Friday, and Sat.
Re: The Gallery
Posted: Thu Sep 17, 2009 11:46 am
by janne_melkersson
Her is the latest pair from my bench.
The boot is made of scotch grain calf which have been "antiqued" by me
10100.jpg
Re: The Gallery
Posted: Sun Sep 20, 2009 8:01 pm
by tjburr
I know I have been greatly remiss in posting pictures of shoes I have made.
Before I post pictures of my latest pair of shoes I wanted to post pictures of the shoes I normallymake , so you can see how much different the style is from what I have been making.
All these shoes/boots were done un-lasted.
My most common order is a plain black which is just enough boring that I did not show any (or for that fact I just realized I do not even have a good picture)
10118.jpg
10119.jpg
10120.jpg
10121.jpg
10122.jpg
10123.jpg
10124.jpg
10125.jpg
Terry
Re: The Gallery
Posted: Sun Sep 20, 2009 8:20 pm
by tjburr
Now for the pair I have just completed.
I have made a few lasted shoes, but I have always made these on a plaster casting of the foot. I have never been 100% happy with these since I was never able to get the last toes to look like I wanted, though I did have a few that I thought looked good. I may have to find some pictures of these so I can post.
With the help of Bill, thanks so much for supporting us, I obtained some lasts. This pair is the first pair, other than a fitter pair, I have made on them.
I must say that I learned lots from this colloquy, many books including Tim's, some articles DW wrote in the leather workers journal, HMSFM, etc. I must also say that I greatly thank Paul Krause for letting me drop by while visiting relatives in Arizona, and showing me how to put a monofilament bristle on since I would still be sewing the welt otherwise. Previous pairs I made using saddle needles which I did not like as well, since I was not able to make a good attachement of the fishing line.
I still have a long way to go to feel as confident with these as my other shoe styles. There are some definite things I would do different, and I was unhappy that I decided to try to sew on a new sewing machine this pair before practicing more. I previously used a walking foot and purchased a mitsubishi with a wheel, using the same table to save space. The motor however did not have enough torque for the new one and it reduced my already low level of precision with the new machine. I have since bought an electronic motor which is great.
10127.jpg
10128.jpg
Terry
Re: The Gallery
Posted: Mon Sep 21, 2009 7:26 pm
by jkrichard
10130.jpg
10131.jpg
10132.jpg
Finished these today. Tinkering with patterns and possibilities.
Re: The Gallery
Posted: Thu Sep 24, 2009 1:51 pm
by marcell
These shoes just have rest on the top of my workbench, waiting for their owner.
10135.jpg
10136.jpg
10137.jpg
Re: The Gallery
Posted: Fri Sep 25, 2009 5:12 pm
by courtney
10142.jpg
10143.jpg
10144.jpg
Finally finished these!!!! This is the third pair I ever made, the second with soles, and the first ones to fit! [more or less.]
I hand sewed everything, welted and stitched the soles.
Hopefully my next pair will be easier and faster, and maybe fit a little better. the only machinery I used was a belt sander and a 6" bench grinder to make the soles.
Thanks so much to everyone who answered my questions!
Re: The Gallery
Posted: Fri Sep 25, 2009 5:15 pm
by courtney
10146.jpg
These are some belts I made too.
Re: The Gallery
Posted: Sat Sep 26, 2009 12:54 pm
by dw
Just finished these:
10148.jpg
10149.jpg
10150.jpg
10151.jpg
10152.jpg
Tight Stitches
DWFII--HCC Member
Re: The Gallery
Posted: Tue Sep 29, 2009 9:57 am
by dearbone
Here is a recently made shoes,The upper was made some times ago.
10161.jpg
Nasser Vies
HCC- Member
Re: The Gallery
Posted: Sat Oct 10, 2009 12:17 pm
by marcell
A new bespoke shoe for a Swiss customer.
10185.jpg
10186.jpg
Re: The Gallery
Posted: Mon Oct 12, 2009 1:26 pm
by marcell
Re: The Gallery
Posted: Tue Oct 13, 2009 7:31 am
by sorrell
I've been playing with (very short) full cuts in alligator recently. It's a new challenge that's been haunting my dreams lately.
10206.jpg
Re: The Gallery
Posted: Tue Oct 13, 2009 8:38 pm
by j_johansen
Burgandy latigo foot, green burnishable buffalo tops with "Waterbird" inlay in blue and red kangaroo, yellow kangaroo side seam.
These boots where nearly done and changed course with some input from DW. Thank you Sir....J.
(Message edited by j johansen on October 13, 2009)
Re: The Gallery
Posted: Tue Oct 13, 2009 8:48 pm
by j_johansen
Re: The Gallery
Posted: Fri Oct 16, 2009 8:03 am
by romango
Let's try this again...
These are my "scar" Oxfords made with Edleman Lux calf from eBay.
10233.jpg
10234.jpg
10235.jpg
10236.jpg
Re: The Gallery
Posted: Tue Oct 20, 2009 2:05 pm
by paul
Here's my latest finish.
This design was conceptualized by the customer and his family on the drive up from Phoenix. A Tiffany glass Mission style lamp shade is what they were after. There's another, also of their design concept, that I'm doing for them soon.
The foot of the these is water buffalo, and the tops are kangaroo set in a goat skin base layer. The larger mid tone panels were hand colored.
More than a bit of a challenge, but gratifying.
Paul
10250.jpg
Re: The Gallery
Posted: Wed Oct 21, 2009 7:26 pm
by j_johansen
10258.jpg
10259.jpg
My first go at a leather sole, and a toe bug.... J.
Re: The Gallery
Posted: Fri Oct 23, 2009 1:31 pm
by luckyduck
Hi,
My first pair of western boots. Firsts include welting, stacked heels, pegging.
Yes, the tabs are on the wrong side of the stitching and they look rough, but they fit and are wearable!
Hardke calf, pig lining. Used DW's book for instructions.
10261.jpg
Paul
Re: The Gallery
Posted: Fri Oct 23, 2009 2:33 pm
by jkrichard
10263.jpg
Black on black on black men's stingray slip-ons, stingray, kid, and stingray + gator back.
3/4 welt--- I attempted to prep the soles for handsewing ---and durn near made a mess of them...machine stitched, sadly. We'll try again on the next pair.
There's a lot that I liked about working with stingray... a dulled and round needle on the post machine worked well. There's a lot I didn't like about working with stingray: namely, my knives are still dull I think.
I'll have one more slip-on to post next week---then I'll show you all some more "serious" shoes.
-Jeff
Re: The Gallery
Posted: Sun Oct 25, 2009 11:41 am
by marcell
This pair is just finished in my workshop, by my apprentice, Dani Hart from London, UK. I must say, not so many student can impress me, but she did.