Glues and Cements
- dearbone
- 8
- Posts: 1032
- Joined: Fri Oct 12, 2007 12:23 pm
- Full Name: Nasser Vies
- Location: Toronto, Ontario, Canada
- Been Liked: 3 times
Re: Glues and Cements
The owner Del,told me he has a studio near my shop and likes to stop by the shop sometime, if he does,i will ask him about carrying the glue.
Nasser
Nasser
- dw
- Seanchaidh
- Posts: 5830
- Joined: Wed Jan 01, 1997 10:00 am
- Full Name: DWFII
- Location: Redmond, OR
- Has Liked: 204 times
- Been Liked: 122 times
- Contact:
Re: Glues and Cements
Jon, Nasser,
I could be wrong, but I think Hirschkleber is hoof glue.
[hr][/hr]
Without "good," there is no "better," without "better," no "best."
And without the recognition that there is a hierarchy of excellence in all things, nothing rises above the level of mundane.
Tight Stitches
DWFII--HCC Member
[center]Little Jack Dandiprat in a white petticoat,
The longer he lives, the shorter he grows.[/center]
I could be wrong, but I think Hirschkleber is hoof glue.
[hr][/hr]
Without "good," there is no "better," without "better," no "best."
And without the recognition that there is a hierarchy of excellence in all things, nothing rises above the level of mundane.
Tight Stitches
DWFII--HCC Member
[center]Little Jack Dandiprat in a white petticoat,
The longer he lives, the shorter he grows.[/center]
-
- 2
- Posts: 78
- Joined: Tue Jun 23, 2009 3:59 pm
- Full Name: Georgene Mckim
- Been Liked: 1 time
Re: Glues and Cements
This safety sheet for Hirschkleber identifies the adhesive as one made of modified starches, not an animal product.
http://www.ortoped.ca/pdf/msds/OrtoPed_MSDS-A_OP-73222_Hirschkleber-Adhesive.pdf
Georgene
http://www.ortoped.ca/pdf/msds/OrtoPed_MSDS-A_OP-73222_Hirschkleber-Adhesive.pdf
Georgene
- dw
- Seanchaidh
- Posts: 5830
- Joined: Wed Jan 01, 1997 10:00 am
- Full Name: DWFII
- Location: Redmond, OR
- Has Liked: 204 times
- Been Liked: 122 times
- Contact:
Re: Glues and Cements
Georgene,
Thanks for that. I had never seen the safety sheet. My source was a Goetz rep. But I always did think it might be suspicious.
[hr][/hr]
Without "good," there is no "better," without "better," no "best."
And without the recognition that there is a hierarchy of excellence in all things, nothing rises above the level of mundane.
Tight Stitches
DWFII--HCC Member
[center]Little Jack Dandiprat in a white petticoat,
The longer he lives, the shorter he grows.[/center]
Thanks for that. I had never seen the safety sheet. My source was a Goetz rep. But I always did think it might be suspicious.
[hr][/hr]
Without "good," there is no "better," without "better," no "best."
And without the recognition that there is a hierarchy of excellence in all things, nothing rises above the level of mundane.
Tight Stitches
DWFII--HCC Member
[center]Little Jack Dandiprat in a white petticoat,
The longer he lives, the shorter he grows.[/center]
- dearbone
- 8
- Posts: 1032
- Joined: Fri Oct 12, 2007 12:23 pm
- Full Name: Nasser Vies
- Location: Toronto, Ontario, Canada
- Been Liked: 3 times
Re: Glues and Cements
Georgene,
Thanks for clarifying that for us,it is good stuff for turning/folding upper edges and heel stacking,if i can get it to stick on a mellow sole for out-stitching,that will be great,but maybe that's a little wishful thinking, i will do a test.
Thanks for clarifying that for us,it is good stuff for turning/folding upper edges and heel stacking,if i can get it to stick on a mellow sole for out-stitching,that will be great,but maybe that's a little wishful thinking, i will do a test.
- courtney
- 6
- Posts: 333
- Joined: Tue Feb 24, 2009 12:46 am
- Full Name: courtney schamach
- Location: petaluma, california, u.s.a.
Re: Glues and Cements
For all the people that say barge does not hold so good, I can tell you I just spent about an hour trying to get my eva heels off with thinner and heat and knives.
i'm thinking maybe next time I wont glue much in the middle of the heel and just worry about the outside.
Courtney
i'm thinking maybe next time I wont glue much in the middle of the heel and just worry about the outside.
Courtney
-
- 8
- Posts: 1038
- Joined: Tue Mar 08, 2005 10:00 am
- Full Name: Paul Krause
- Location: Prescott, Arizona, USA
- Been Liked: 14 times
- Contact:
Re: Glues and Cements
Courtney, depending on the thickness of the EVA you're going to use for your heel, you may find that it will stretch and tear in the middle if it's not glued.
Just sayin'.
Thinner will work with the extra ingredients of patience and a pry knife. I'd not use heat on EVA, it will shrink.
Paul
Just sayin'.
Thinner will work with the extra ingredients of patience and a pry knife. I'd not use heat on EVA, it will shrink.
Paul
- jon_g
- 5
- Posts: 207
- Joined: Wed Feb 18, 2009 10:46 am
- Full Name: Jon Gray
- Location: Annapolis Royal, Nova Scotia, Canada
- Been Liked: 1 time
- Contact:
Re: Glues and Cements
Courtney,
Once you've got your heels and lifts worked out you will be happy that they are well cemented.
Jon
Once you've got your heels and lifts worked out you will be happy that they are well cemented.
Jon
- courtney
- 6
- Posts: 333
- Joined: Tue Feb 24, 2009 12:46 am
- Full Name: courtney schamach
- Location: petaluma, california, u.s.a.
Re: Glues and Cements
Alright, just trying to think how to make it easier now that I guess I'm going to have to be a shoe repairman too.
Courtney
Courtney
- dearbone
- 8
- Posts: 1032
- Joined: Fri Oct 12, 2007 12:23 pm
- Full Name: Nasser Vies
- Location: Toronto, Ontario, Canada
- Been Liked: 3 times
Re: Glues and Cements
Lisa,
Usually the place that sell the cement also sell the thinner,I use AP thinner and i buy it from the same place i order my Barge cement.
Nasser
Usually the place that sell the cement also sell the thinner,I use AP thinner and i buy it from the same place i order my Barge cement.
Nasser
- romango
- 8
- Posts: 854
- Joined: Wed Apr 18, 2007 1:40 pm
- Full Name: Rick Roman
- Location: Eugene, Oregon, USA
- Been Liked: 8 times
- Contact:
Re: Glues and Cements
I have used Rubber Cement Thinner found at art supply stores. It's a mixture of hexane and pentane, as I recall. Possibly other things too. It's relativity expensive. I guess you could get by with just hexane, purchased at a hardware store.
-
- 2
- Posts: 78
- Joined: Tue Jun 23, 2009 3:59 pm
- Full Name: Georgene Mckim
- Been Liked: 1 time
Re: Glues and Cements
Rubber cement thinner, or depending on the brand, naptha. But since everything has been reformulated lately, best bet is to get the actual brand of thinner for your brand of rubber cement. Barge makes an all purpose thinner that's supposed to thin both all purpose and rubber cement, (or so they tell me at the finder), but I'm still buying up specific purpose thinner and will use the dedicated product until I HAVE to switch.
Georgene
Georgene
-
- 2
- Posts: 52
- Joined: Tue Jan 11, 2011 9:39 am
- Full Name: Arthur Van Hecke
- Location: Indian Head, Maryland, U.S.A.
Re: Glues and Cements
Hi Lisa,
Rubber Cement Thinner for the brand of rubber cement you are using. This is usually the solvent component of the particular rubber cement. For Petronio's #8 Rubber Cement, you would use Petronio's #8 Rubber Cement Thinner.
Art
Rubber Cement Thinner for the brand of rubber cement you are using. This is usually the solvent component of the particular rubber cement. For Petronio's #8 Rubber Cement, you would use Petronio's #8 Rubber Cement Thinner.
Art
- sorrell
- 6
- Posts: 320
- Joined: Thu Jun 16, 2005 12:00 pm
- Full Name: Lisa Sorrell
- Location: Guthrie, OK
- Been Liked: 10 times
- Contact:
Re: Glues and Cements
Ah, OK. I've been using Barge all-purpose thinner but it doesn't really mix well. My supplier doesn't have a dedicated rubber cement thinner and I didn't know what other alternatives there were.
Lisa
Lisa
- sorrell
- 6
- Posts: 320
- Joined: Thu Jun 16, 2005 12:00 pm
- Full Name: Lisa Sorrell
- Location: Guthrie, OK
- Been Liked: 10 times
- Contact:
Re: Glues and Cements
Arthur,
Good to know that Petronio's has a dedicated rubber cement thinner. I've been using Barge rubber cement but since they changed the formula I hate it. I've tried Petronio's and liked it better but didn't realize they actually have a thinner for it. It needs it! It's way thicker than Barge!
Lisa
Good to know that Petronio's has a dedicated rubber cement thinner. I've been using Barge rubber cement but since they changed the formula I hate it. I've tried Petronio's and liked it better but didn't realize they actually have a thinner for it. It needs it! It's way thicker than Barge!
Lisa
-
- 2
- Posts: 52
- Joined: Tue Jan 11, 2011 9:39 am
- Full Name: Arthur Van Hecke
- Location: Indian Head, Maryland, U.S.A.
Re: Glues and Cements
Lisa,
I've always used Master Contact Cements and thinner and Petronio Rubber Cement and thinner, almost exclusively after Barge went flaky. Petronio products just seem to do the same thing time after time and work time after time. They seem to be available from almost all of the suppliers. I get mine from Southern. In your neck of the woods Kevin has it at Springfield Leather I think.
Art
I've always used Master Contact Cements and thinner and Petronio Rubber Cement and thinner, almost exclusively after Barge went flaky. Petronio products just seem to do the same thing time after time and work time after time. They seem to be available from almost all of the suppliers. I get mine from Southern. In your neck of the woods Kevin has it at Springfield Leather I think.
Art
- dw
- Seanchaidh
- Posts: 5830
- Joined: Wed Jan 01, 1997 10:00 am
- Full Name: DWFII
- Location: Redmond, OR
- Has Liked: 204 times
- Been Liked: 122 times
- Contact:
Re: Glues and Cements
I guess I go back too far...I remember Barge rubber cement when it was just rubber cement.
Last time I bought Barge Rubber Cement and thinner, I got sick from the fumes (this was after they reformulated...adding MEK).
What's more I didn't like the way it dried or the open time... or anything about it functionally.
Now I buy Elmer's Rubber cement off the Internet (usually cheaper than I can get it from a finder) and I use Bestine thinner I get from Michael's.
Both the Elmers cement and the Bestine smell just like the old Barge did. And behave the way I expect them to, as well.
[Actually Best makes the very best Rubber cement (IMO) but it is expensive.]
Tight Stitches
DWFII--HCC Member
[center]Little Jack Dandiprat in a white petticoat,
The longer he lives, the shorter he grows.[/center]
Last time I bought Barge Rubber Cement and thinner, I got sick from the fumes (this was after they reformulated...adding MEK).
What's more I didn't like the way it dried or the open time... or anything about it functionally.
Now I buy Elmer's Rubber cement off the Internet (usually cheaper than I can get it from a finder) and I use Bestine thinner I get from Michael's.
Both the Elmers cement and the Bestine smell just like the old Barge did. And behave the way I expect them to, as well.
[Actually Best makes the very best Rubber cement (IMO) but it is expensive.]
Tight Stitches
DWFII--HCC Member
[center]Little Jack Dandiprat in a white petticoat,
The longer he lives, the shorter he grows.[/center]
-
- 2
- Posts: 52
- Joined: Tue Jan 11, 2011 9:39 am
- Full Name: Arthur Van Hecke
- Location: Indian Head, Maryland, U.S.A.
Re: Glues and Cements
DW,
I have a can with Bestine and Best-Test on it. Are these what you are talking about? Both the solvent and cement cost about $12 a Quart. It is from my daughter's art stuff so it might not be the same.
Art
I have a can with Bestine and Best-Test on it. Are these what you are talking about? Both the solvent and cement cost about $12 a Quart. It is from my daughter's art stuff so it might not be the same.
Art
- dw
- Seanchaidh
- Posts: 5830
- Joined: Wed Jan 01, 1997 10:00 am
- Full Name: DWFII
- Location: Redmond, OR
- Has Liked: 204 times
- Been Liked: 122 times
- Contact:
Re: Glues and Cements
Arthur,
Same stuff. I think I get the Bestine a little cheaper but I buy the Elmers in gallons. At a lot less than I could buy a gallon of Best-Test...if I could find it.
Tight Stitches
DWFII--HCC Member
[center]Little Jack Dandiprat in a white petticoat,
The longer he lives, the shorter he grows.[/center]
Same stuff. I think I get the Bestine a little cheaper but I buy the Elmers in gallons. At a lot less than I could buy a gallon of Best-Test...if I could find it.
Tight Stitches
DWFII--HCC Member
[center]Little Jack Dandiprat in a white petticoat,
The longer he lives, the shorter he grows.[/center]
-
- Posts: 8
- Joined: Fri Apr 02, 2010 9:00 am
- Full Name: John Shepherd
- Location: Nanaimo, BC, Canada
Re: Glues and Cements
Hi Lisa,
I find that rubber cement works better when it it a little thick. To thin it, I just add more rubber cement from a new bottle once in a while.
I find that rubber cement works better when it it a little thick. To thin it, I just add more rubber cement from a new bottle once in a while.
- homeboy
- 6
- Posts: 410
- Joined: Mon Jan 21, 2008 10:00 am
- Full Name: Jake Dobbins
- Location: Mountain View, AR
- Has Liked: 111 times
- Been Liked: 30 times
Re: Glues and Cements
Lisa,
I use Duall 88 rubber cement, but I can't actually remember the last time I thinned it out. It's used pretty darn fast. I usually add more rubber cement to the bottle when low. Sorry....looks like you have your answer above though.
I use Duall 88 rubber cement, but I can't actually remember the last time I thinned it out. It's used pretty darn fast. I usually add more rubber cement to the bottle when low. Sorry....looks like you have your answer above though.
- dw
- Seanchaidh
- Posts: 5830
- Joined: Wed Jan 01, 1997 10:00 am
- Full Name: DWFII
- Location: Redmond, OR
- Has Liked: 204 times
- Been Liked: 122 times
- Contact:
Re: Glues and Cements
Jake,
I didn't know Duall made a rubber cement or are you talking about their all purpose?
Tight Stitches
DWFII--HCC Member
[center]Little Jack Dandiprat in a white petticoat,
The longer he lives, the shorter he grows.[/center]
I didn't know Duall made a rubber cement or are you talking about their all purpose?
Tight Stitches
DWFII--HCC Member
[center]Little Jack Dandiprat in a white petticoat,
The longer he lives, the shorter he grows.[/center]
- homeboy
- 6
- Posts: 410
- Joined: Mon Jan 21, 2008 10:00 am
- Full Name: Jake Dobbins
- Location: Mountain View, AR
- Has Liked: 111 times
- Been Liked: 30 times
Re: Glues and Cements
Dee-Dubb,
No Sir, it's rubber cement. At least they did make it. It's been some time since I bought any.
I really like it. And as I mentioned, I don't ever remembering EVER thinning any of it.
Still use their all purpose too.
No Sir, it's rubber cement. At least they did make it. It's been some time since I bought any.
I really like it. And as I mentioned, I don't ever remembering EVER thinning any of it.
Still use their all purpose too.
- homeboy
- 6
- Posts: 410
- Joined: Mon Jan 21, 2008 10:00 am
- Full Name: Jake Dobbins
- Location: Mountain View, AR
- Has Liked: 111 times
- Been Liked: 30 times
Re: Glues and Cements
Stop the presses! I stand corrected!
Got to thinking and actually got up out of my easy chair and went down to the shop. I'm actually using the old Barge Rubber Cement! It's got a pale blue label almost like Duall 88 all purpose cement.
I'm sorry! What can I say.....I'm getting a little senile!
Got to thinking and actually got up out of my easy chair and went down to the shop. I'm actually using the old Barge Rubber Cement! It's got a pale blue label almost like Duall 88 all purpose cement.
I'm sorry! What can I say.....I'm getting a little senile!