Around the shop
-
- 7
- Posts: 662
- Joined: Wed Mar 31, 2004 6:42 am
- Full Name: lance pryor
- Been Liked: 3 times
Re: Around the shop
I don't know if the following would be of any interest to anyone else, but DW's recent discussion of the importance of sharpening has led me to spend some time attempting to improve my skills -- or lack thereof -- in this area.
In any event, the on-line retailer Sierra Trading Post has 8 inch translucent Arkansas whetstones/benchstones on sale very inexpensively (below $20 each), as well as some smaller sizes and different stones. These are cosmetic seconds but I have a couple and they seem very good to me, with perhaps a small crack in them that wouldn't seem to affect their performance.
Go to www.sierratradingpost.com and do a search for "dan" which will generate the appropriate listings.
Sierra has a VERY accomodating return policy, and return shipping is only $5, so there is little risk in ordering.
[Just to be clear, I have no commercial interest in the Sierra business.]
In any event, the on-line retailer Sierra Trading Post has 8 inch translucent Arkansas whetstones/benchstones on sale very inexpensively (below $20 each), as well as some smaller sizes and different stones. These are cosmetic seconds but I have a couple and they seem very good to me, with perhaps a small crack in them that wouldn't seem to affect their performance.
Go to www.sierratradingpost.com and do a search for "dan" which will generate the appropriate listings.
Sierra has a VERY accomodating return policy, and return shipping is only $5, so there is little risk in ordering.
[Just to be clear, I have no commercial interest in the Sierra business.]
Re: Around the shop
I remake my web page in the recent few days. I decided not to make a shoe from every model, as I am not sure that I can sell them. ON the other hand I can't say to all my customers that "we can do whatever you want", as they don't know what they want.. old problem..
So I made drawing from all the models I found out (still wokring on it) and this way they can take a look, but there are still place to imagine with different leathers, colours, technlogies..
I am interested to hear your opinions too, so please...
So I made drawing from all the models I found out (still wokring on it) and this way they can take a look, but there are still place to imagine with different leathers, colours, technlogies..
I am interested to hear your opinions too, so please...
Re: Around the shop
You do not have the required permissions to view the files attached to this post.
Re: Around the shop
Marcell,
I like the drawings. With my customers I find that they find it hard to "translate" a drawing into a shoe and are sometimes very surprised when the shoe is ready. As time goes by and you make the models it may be helpful for your customers to see a picture as well but I agree that it is not always a good investment to make a sample for every model you offer.
It may be helpful to show them at least a few pictures of shoes and the matching drawing to give them an idea on how to interpret the drawings.
Just my
Rob
PS is the watermark in the paper your company logo? Nice touch.
I like the drawings. With my customers I find that they find it hard to "translate" a drawing into a shoe and are sometimes very surprised when the shoe is ready. As time goes by and you make the models it may be helpful for your customers to see a picture as well but I agree that it is not always a good investment to make a sample for every model you offer.
It may be helpful to show them at least a few pictures of shoes and the matching drawing to give them an idea on how to interpret the drawings.
Just my
Rob
PS is the watermark in the paper your company logo? Nice touch.
- dw
- Seanchaidh
- Posts: 5830
- Joined: Wed Jan 01, 1997 10:00 am
- Full Name: DWFII
- Location: Redmond, OR
- Has Liked: 204 times
- Been Liked: 122 times
- Contact:
Re: Around the shop
Marcell,
I read in another forum (Style Forum) that you don't use a computer to generate theses drawing. I'm amazed...very clean work.
That said...and just a thought...if you could take a photo of one shoe in a particular style, say a capped oxford and could then bring it into a program such as Photoshop or PhotoPaint or PaintShopPro or even the Gimp (free)...and you took the time to learn the technique, you could use that shoe over and over again just changing the colours. You could even change just the cap and leave the rest original. And one step beyond that is to photograph exotic skins such as alligator or snake and with a little effort you could take the photograph of a calf derby and convert it into an alligator derby.
You could even take your drawings and scan them into a drawing program such as Illustrator or CorelDraw or Inkscape (free) and change the colours...just to show your customers what the shoe would look like in a green, for instance. It's not as realistic as the photo techniques but instructive all the same.
Just a thought...
Tight Stitches
DWFII--Member HCC
I read in another forum (Style Forum) that you don't use a computer to generate theses drawing. I'm amazed...very clean work.
That said...and just a thought...if you could take a photo of one shoe in a particular style, say a capped oxford and could then bring it into a program such as Photoshop or PhotoPaint or PaintShopPro or even the Gimp (free)...and you took the time to learn the technique, you could use that shoe over and over again just changing the colours. You could even change just the cap and leave the rest original. And one step beyond that is to photograph exotic skins such as alligator or snake and with a little effort you could take the photograph of a calf derby and convert it into an alligator derby.
You could even take your drawings and scan them into a drawing program such as Illustrator or CorelDraw or Inkscape (free) and change the colours...just to show your customers what the shoe would look like in a green, for instance. It's not as realistic as the photo techniques but instructive all the same.
Just a thought...
Tight Stitches
DWFII--Member HCC
- romango
- 8
- Posts: 854
- Joined: Wed Apr 18, 2007 1:40 pm
- Full Name: Rick Roman
- Location: Eugene, Oregon, USA
- Been Liked: 8 times
- Contact:
Re: Around the shop
I came across this knife in my local hardware store. Looks like a national brand. It makes light work of cutting the thickest of leather. Very nice for trimming the insole feather to the last.
It has snap off blades but I suspect they could be sharpened, if one were clever.
It has snap off blades but I suspect they could be sharpened, if one were clever.
You do not have the required permissions to view the files attached to this post.
-
- 2
- Posts: 71
- Joined: Tue Jan 30, 2007 12:06 am
- Full Name: Sean MacMillan
- Location: Kelowna, British Columbia, Canada
Re: Around the shop
Rick,
I use one of these knives all of the time in my shop... I've never used the hook blade though... Darn it, why didn't I think of that??? I'm off to the hardware store tomorrow morning! BTW the straight olfa blades come in a harder steel variety ( I think it's called contactor grade or some such thing) Perhaps this blade comes in the same?
Sean
I use one of these knives all of the time in my shop... I've never used the hook blade though... Darn it, why didn't I think of that??? I'm off to the hardware store tomorrow morning! BTW the straight olfa blades come in a harder steel variety ( I think it's called contactor grade or some such thing) Perhaps this blade comes in the same?
Sean
Re: Around the shop
I use that knife all the time as well but with the black blades they are very sharp. I filited my thumb doing repairs to Redwing work boots with that knife. 7 stitches Thanksgiving Day 2003. Be very careful and if the blade is dry it drags oil it before use and you can cut through anything.
Guy Shannon
Guy Shannon
-
- 2
- Posts: 71
- Joined: Tue Jan 30, 2007 12:06 am
- Full Name: Sean MacMillan
- Location: Kelowna, British Columbia, Canada
-
- 6
- Posts: 469
- Joined: Mon Jan 29, 2007 10:00 am
- Full Name: Jesse Lee Cantrell
- Location: Town of Niagara, NY, USA
Re: Around the shop
All. Anyone use the old style 'hook' knives made by Hyde (?). I still have one that I used 25 years ago. They can be ground down and shaped as you please.
Guy- You are so right about using a little oil for a slick cut (such as sole or inner sole leather). I use Neetsfoot oil for this.
JesseLee
Guy- You are so right about using a little oil for a slick cut (such as sole or inner sole leather). I use Neetsfoot oil for this.
JesseLee
Re: Around the shop
Hi JesseLee.
You can still get Hyde knives or at least a reasonable representation of them. I have an old Hyde lip knife that I could shave my head with....I'll keep useing my razor.
I'll be at Labelle during the first week in Febuary if you want me to check for you. I can send one down to you if you want.
Guy
You can still get Hyde knives or at least a reasonable representation of them. I have an old Hyde lip knife that I could shave my head with....I'll keep useing my razor.
I'll be at Labelle during the first week in Febuary if you want me to check for you. I can send one down to you if you want.
Guy
- homeboy
- 6
- Posts: 410
- Joined: Mon Jan 21, 2008 10:00 am
- Full Name: Jake Dobbins
- Location: Mountain View, AR
- Has Liked: 111 times
- Been Liked: 30 times
Re: Around the shop
I got a chance to work with Renia's new cement...Ortec. The great thing about this cement is it's Toluene-free! Suppose to stick to anything, AND it dries clear!
Bottomed out a pair of boots this afternoon. I was impressed! You can work pretty darn fast with it, and it sticks good! By the way, I was working with leather.
Good luck!
Bottomed out a pair of boots this afternoon. I was impressed! You can work pretty darn fast with it, and it sticks good! By the way, I was working with leather.
Good luck!
-
- 4
- Posts: 159
- Joined: Sat Aug 05, 2006 9:00 am
- Full Name: Larry A. Peterson
- Location: Ephraim, Utah, USA
Re: Around the shop
Jake,
Does this new Ortec stick as good as all purpose for heels? I use A.P. for everything instead of managing two glue bottles.
Thanx, Larry Peterson
Does this new Ortec stick as good as all purpose for heels? I use A.P. for everything instead of managing two glue bottles.
Thanx, Larry Peterson
- homeboy
- 6
- Posts: 410
- Joined: Mon Jan 21, 2008 10:00 am
- Full Name: Jake Dobbins
- Location: Mountain View, AR
- Has Liked: 111 times
- Been Liked: 30 times
Re: Around the shop
Hey Larry,
Funny you should ask. I'll be stacking some heels tomorrow. My guess is...yes, it will stick as good as A.P. Like I said, it looks very promising. Will give you a complete report tomorrow night.
Adios, Jake
Funny you should ask. I'll be stacking some heels tomorrow. My guess is...yes, it will stick as good as A.P. Like I said, it looks very promising. Will give you a complete report tomorrow night.
Adios, Jake
- homeboy
- 6
- Posts: 410
- Joined: Mon Jan 21, 2008 10:00 am
- Full Name: Jake Dobbins
- Location: Mountain View, AR
- Has Liked: 111 times
- Been Liked: 30 times
Re: Around the shop
Larry,
Stacked a few lifts today. The jury is still out on the Ortec. As you probably know, I "hammer-jack" all my lifts. During the process, I sometimes "cup" the lifts. This makes them really hard to glue down since they are truly hard as a board.
I had to work pretty hard to get a few of the lifts to stay down. Don't know if I was working too fast, or the cement wasn't up to snuff.
Give me some time. I'll have ya an answer one of these days. Just don't want to speak too soon.
Take care!
Stacked a few lifts today. The jury is still out on the Ortec. As you probably know, I "hammer-jack" all my lifts. During the process, I sometimes "cup" the lifts. This makes them really hard to glue down since they are truly hard as a board.
I had to work pretty hard to get a few of the lifts to stay down. Don't know if I was working too fast, or the cement wasn't up to snuff.
Give me some time. I'll have ya an answer one of these days. Just don't want to speak too soon.
Take care!
Re: Around the shop
New stuff in my workshop. Originally it has been used for a special type of press glue. I will show you soon how I use it..
You do not have the required permissions to view the files attached to this post.
Re: Around the shop
And a crimping board - I asked an old shoe technician guy to make it for me. He made a perfect job.
You do not have the required permissions to view the files attached to this post.
-
- 2
- Posts: 82
- Joined: Mon Jan 14, 2008 10:00 am
- Full Name: Jim McCormack
- Location: London, uk
Re: Around the shop
Just received these from the U.S. My interest was in the awl handles and blades, the other bits and bobs were thrown in gratis. They are good quality awl blades, the names stamped on them are unknown to me but I guess they are no longer made,a shame as quality tools are hard to find these days.
Regards Mack.
You do not have the required permissions to view the files attached to this post.
- dw
- Seanchaidh
- Posts: 5830
- Joined: Wed Jan 01, 1997 10:00 am
- Full Name: DWFII
- Location: Redmond, OR
- Has Liked: 204 times
- Been Liked: 122 times
- Contact:
Re: Around the shop
Mack,
Looks like you got a "find." Might be several stitch pricks in the lot. Any doubles?
Tight Stitches
DWFII--Member HCC
Looks like you got a "find." Might be several stitch pricks in the lot. Any doubles?
Tight Stitches
DWFII--Member HCC
- dearbone
- 8
- Posts: 1032
- Joined: Fri Oct 12, 2007 12:23 pm
- Full Name: Nasser Vies
- Location: Toronto, Ontario, Canada
- Been Liked: 3 times
Re: Around the shop
I made two of these boards recently from an old Oak table top than a shoe diaplay and now I make tool handles and boards like this out of it,(not fine finish yet) my old one was breaking after many years of service, This holy Oak was born before me and it probably will out live me.
You do not have the required permissions to view the files attached to this post.
- romango
- 8
- Posts: 854
- Joined: Wed Apr 18, 2007 1:40 pm
- Full Name: Rick Roman
- Location: Eugene, Oregon, USA
- Been Liked: 8 times
- Contact:
Re: Around the shop
I had this sign made for my garage shop. It's mostly so people know they are in the right place when they come to see me. A guy in Ashland, Oregon makes these type of vintage signs. This cost me $158. delivered. A great bargain. http://www.tomsvintagesigns.com/storefront1.html
The shoe on the sign was inspired by one of the shoes that Marcell posted in the gallery. (Thanks Marcell).
(Message edited by romango on June 03, 2008)
The shoe on the sign was inspired by one of the shoes that Marcell posted in the gallery. (Thanks Marcell).
(Message edited by romango on June 03, 2008)
You do not have the required permissions to view the files attached to this post.
Re: Around the shop
Rick,
That is a very nice sign. Is it carved? In the picture it seems to have "depth" to it.
Never mind it doesn't feature your shoe, gives you inspiration every time you open up the shop.
Rob
That is a very nice sign. Is it carved? In the picture it seems to have "depth" to it.
Never mind it doesn't feature your shoe, gives you inspiration every time you open up the shop.
Rob