Page 1 of 67

The Gallery

Posted: Sat May 14, 2005 8:56 pm
by marc
A boot based on a design and last from the early 1400s.
3555.jpg


And
3556.jpg


A wax seal repro I picked up at the Medievalist Conference in Kalamazoo this past weekend.

Marc

Re: The Gallery

Posted: Sat May 14, 2005 10:02 pm
by marc
As long as I'm at it, here's the display I had at last week's conference:
3560.jpg


It's more cluttered than I wanted, but I was trying to show as much as I could of the whole medieval technology thing.

Marc

Re: The Gallery

Posted: Mon May 16, 2005 9:18 am
by paul
Hello all,

Here are a pair I finished recently.
Garlin Newman Water Buffalo.
Size 4.5! Smallest size I've made so far.
Sweet to hold such a piece in the hand.

PK
3562.jpg
3563.jpg
3564.jpg

Re: The Gallery

Posted: Fri May 27, 2005 4:25 pm
by Brian C. Thomas
Here is a pair stitched on one of my Landis G’s. I definitely got it dialed in now!
3576.jpg


“Curve Needle for the Band”
Brian C. Thomas

Re: The Gallery

Posted: Mon Jun 13, 2005 5:42 am
by dw
Just finished these...French Calf all the way. I used my old clover leaf tongue that I haven't put on a boot for near on to 15 years. These were made for a long time customer and he insisted. Had to revive the patterns and redesign them a little too. "Blucher" toe. Customer has a neuroma that age has aggravated and although he has been wearing 2 1/4" heels for 30 years he decided to try out a pair at 1 5/8".
3603.jpg

Re: The Gallery

Posted: Wed Jun 22, 2005 12:08 pm
by paul
Black and Blue.

These are the last two pair I've done. The first is a pair for a Frenchman who flies Lear Jets out of Switzerland. His favorite place on earth is Arizona. This is for that. The last of the GH Buffalo sides with Kid tops.
3608.jpg


This second pair is my fist buckaroo using one of Bill Tippets GFS lasts. Bill was incredibly helpful with getting the size right. I just needed a little fill in the instep area mostly. I really appreciated his help. These are Drum Stuffed Roo.
3609.jpg


PK

Re: The Gallery

Posted: Sun Jul 10, 2005 7:16 am
by Brian C. Thomas
Here a pair of black bull hides.
3616.jpg




"Non-Fiction for the Brand"
Brian C. Thomas

Re: The Gallery

Posted: Sun Aug 07, 2005 7:21 am
by dw
Here's a pair of boots we just finished...10" veg 'roo, Cuban heel...made by, and for, Randee Frommer--Bootmaker.
3631.jpg



Tight Stitches
DWFII--Member HCC

Re: The Gallery

Posted: Tue Aug 09, 2005 11:46 am
by sorrell
This is a pair of boots I took to a show in Santa Fe. I won Best Artist in the Art to Wear category with them.
3635.jpg

Re: The Gallery

Posted: Tue Aug 09, 2005 11:49 am
by sorrell
Cool! I just posted a picture!

Here's another pair I just finished for a customer. It's only one boot. The cowboy and the horses are on one boot and the End of the Trail and the buffalo are on the other boot. My photographer combined two photos so you could see all four design elements.
3637.jpg

Re: The Gallery

Posted: Tue Aug 09, 2005 11:50 am
by sorrell
By the way, PK walked me through the "posting a picture" process and then gently nagged me until I actually tried it. Thanks, Paul!

Lisa

Re: The Gallery

Posted: Fri Aug 19, 2005 2:06 pm
by sorrell
I should be working but I don't want to, so I thought I'd post a few pictures instead. That's work-related, isn't it?

This is a reproduction of the Nudie boots on the back cover of "Cowboy Boots."
3666.jpg

Re: The Gallery

Posted: Fri Aug 19, 2005 2:08 pm
by sorrell
The customer got the basic design for this boot from a boot book somewhere, but he changed all of the leathers and colors. I wouldn't have thought to put burgundy and red together but I like it.
3668.jpg

Re: The Gallery

Posted: Fri Aug 19, 2005 2:17 pm
by sorrell
One more and then I'll go back to work...

These have a stingray foot. 'nuf said.
3670.jpg

Re: The Gallery

Posted: Fri Sep 02, 2005 11:12 am
by marc
Forwarded for William Stephenson <uilliam@earthlink.net>:
A pair of boots based on the "Fell boot" from Driel-Murray, Carol van. "Footwear in the North-Western Provinces of the Roman Empire." In In Stepping through Time: Archaeological Footwear from Prehistoric Times until 1800, 336-376. ZwoIIe Netherlands: Stichting Promotie Archeologie, 2001.
3699.jpg

Re: The Gallery

Posted: Mon Sep 19, 2005 9:39 am
by paul
I don't make many shoes. But this is the second pair of this style I've made. It's from Koeleffs Geometric Pattern Book.
3722.jpg

3723.jpg


I sure do wish it included some guidlines for sequence. That's my biggest obstacle. The next pair, I'm working on now, is being the same way. It's a zipper boot spin off of the elastic ankle boot in the same book. This is the second time for this other pair, too. And it, too, is being much more difficult.

Frank, didn't you (or someone else) say someone was working on a shoe construction sequence book?

I can work it out after awhile, but it's real crainial for me. It'll be good to talk with shoe makers at the AGM (how's that Bill?)

PK

Re: The Gallery

Posted: Mon Sep 26, 2005 8:48 pm
by Lisa Cresson
Marc,
Those boots you posted, do they have nails on the bottom? and what type of leather did they use to create them? I am referring to the posting you made for a friend repeated below:
Thanks,
Lisa
----------
By marc carlson on Friday, September 02, 2005 - 11:12 am: Post for William Stephenson <uilliam@earthlink.net>:
A pair of boots based on the "Fell boot" from Driel-Murray, Carol van. "Footwear in the North-Western Provinces of the Roman Empire." In In Stepping through Time: Archaeological Footwear from Prehistoric Times until 1800, 336-376. ZwoIIe Netherlands: Stichting Promotie Archeologie, 2001.

Re: The Gallery

Posted: Thu Oct 13, 2005 7:09 am
by William Stephenson
Lisa,
The "Fell boot" was made from 4/5 oz veg tanned cow. and yes, they are hob nailed on the bottom. The hobs were obtained from La Prevo Leather in the UK. I did them as a prototype study for a group of Roman re-enactors.

William

Re: The Gallery

Posted: Fri Oct 28, 2005 9:05 am
by paul
Hi all,

I'm gettin' ready for the rush.

A local magazine did a stroy on me recently, even put my grey ol' face on their cover, of all things. I've already had a lot of inquiries and interest, so I thought I should be ready to accomodate.

Printed gift certificates are uninteresting to me, generally, so I made my own.
3752.jpg


It's about 5"x6", and carved on a piece of skirting. I traced the boot out of one of the collectors books I have here in the studio. It only took a swivel knife, beveler, backgrounder and modeling tool. I decided to leave the boots unembelished as I didn't want to influence the receiver in any way with some design or color they'd not prefer.

I mounted it on hot press illustration board, so I could rubber cement the certificate part, which I made up in Word, on the back and be able to remove it later for the next use. I tell the customer that it will be redeemed and exchanged at the time the order is placed. (There's one still out there from two years ago, so I need a few to keep on hand.) This gives the giver something tangible to put under the tree.

Just thought I'd share an idea with ya'll.

PK

Re: The Gallery

Posted: Wed Nov 30, 2005 3:15 pm
by william
Hi All,

More Roman footwear. My interpretation of a "Fell" boot from "Stepping through Time". Decorative lace hole cutting adapted from illustration #7 pg. 343 of the above mentioned reference. Uppers made from 4/5 oz veg tanned cow. Outsoles from 8/9 oz veg cow. Cemented construction. Iron hobs from Le Prevo Leather in the UK.

These are breaking in very nicely and will become my "boot du jour" for my Roman re-enactment activities.

William
3768.jpg

Re: The Gallery

Posted: Thu Dec 01, 2005 6:06 pm
by dw
Hmmm...haven't posted anything in a while. Of course I don't even photograph every pair I make much less post every one.

Here's a pair of six inch Derby boots/packers in (correct me if I'm wrong) what is sometimes called the "Blucher" style. The customer wanted something very like a pair of Lobbs that he had bought. He sent them to me tyo look at (they hadn't been worn) Frankly I was disappointed in the workmanship. Mine are cleaner and nicer finished...in my opinion.

Water buffalo calf, fully lined, integral counter, full gusset tongue, inch and five-eighths heel.
3770.jpg



Tight Stitches
DWFII--HCC Member

Re: The Gallery

Posted: Thu Dec 01, 2005 6:10 pm
by dw
Also, just finished these...

Standard full wellington but of Horween latigo--the leather is the noteworthy feature. Not a bad leather...a little prone to water stain in lighter colours.

14 inch tops, full pegged sole with mid sole (thus accounting for the height of the heel), cuban/military heel, 2 ounce veg calf toe puff/box.
3772.jpg



Tight Stitches
DWFII--HCC Member

Re: The Gallery

Posted: Fri Dec 02, 2005 8:28 am
by william
Tom/Peter,

Seeing as you inquired - here is a pic of the "last" that I made/use to make my Roman footwear. I used plaster bandage to make a mold of my feet - then filled them with plaster of paris and inserted a short length of copper tube in the "leg" so I can use them on a last stand. I screwed them to the wood base which is the shape of the insole plan and built up/shaped the toe using bondo. The thickness of the "base" becomes the cementing margin for attaching the uppers to the insole. Crude - but effective.

Don't laugh to hard now,

William
3774.jpg

Re: The Gallery

Posted: Fri Dec 02, 2005 2:23 pm
by william
Jenny.

Here's an illustration that I hope will explain the"cementing margin" better than words can.
3776.jpg



Tom,

In answer to your first question - 'cause the Romans had a lot of Gaul.

In answer to the second question - yes, I can/do reuse them. I only use them for lasting the uppers. I do not do any hammering on them (it would break them up). FYI - I use a 3 inch wide x 5 yd long plaster bandage per foot up to a size 11. Anything bigger will take more bandage.


Hope this helps,

William

Re: The Gallery

Posted: Mon Dec 12, 2005 11:08 am
by william
Good morning all,

I hope everyone is haveing a wonderful Holiday Season.

More Roman footwear for ya to look at.
3789.jpg


This is a production version of the "Allendale" boot from Stepping through Time with less cutting on the uppers and more coverage over the toes that the prototype study I did. Late 1st C. Uppers made from 4/5 oz veg cow. Soles are 2 layers of precut/oiled soles cemented together, hob nailed and shaped.
3790.jpg

3791.jpg


My interpretation of a pair of 3rd C shoes from Vindolanda (ala Stepping through Time) I made for my wife. Uppers from 4/5 oz veg cow. 6 iron Vibram Diamond Pyramid EVA for the soles 'cause that's what my wife wanted.