Glues and Cements

Share secrets, compare techniques, discuss the merits of materials--eg. veg vs. chrome--and above all, seek knowledge.
Post Reply
Message
Author
User avatar
dearbone
8
8
Posts: 1032
Joined: Fri Oct 12, 2007 12:23 pm
Full Name: Nasser Vies
Location: Toronto, Ontario, Canada
Been Liked: 3 times

Re: Glues and Cements

#176 Post by dearbone »

The owner Del,told me he has a studio near my shop and likes to stop by the shop sometime, if he does,i will ask him about carrying the glue.

Nasser
User avatar
dw
Seanchaidh
Posts: 5830
Joined: Wed Jan 01, 1997 10:00 am
Full Name: DWFII
Location: Redmond, OR
Has Liked: 204 times
Been Liked: 122 times
Contact:

Re: Glues and Cements

#177 Post by dw »

Jon, Nasser,

I could be wrong, but I think Hirschkleber is hoof glue.

[hr][/hr]
Without "good," there is no "better," without "better," no "best."
And without the recognition that there is a hierarchy of excellence in all things, nothing rises above the level of mundane.

Tight Stitches
DWFII--HCC Member

[center]Little Jack Dandiprat in a white petticoat,
The longer he lives, the shorter he grows.[/center]
1947redhed
2
2
Posts: 78
Joined: Tue Jun 23, 2009 3:59 pm
Full Name: Georgene Mckim
Been Liked: 1 time

Re: Glues and Cements

#178 Post by 1947redhed »

This safety sheet for Hirschkleber identifies the adhesive as one made of modified starches, not an animal product.

http://www.ortoped.ca/pdf/msds/OrtoPed_MSDS-A_OP-73222_Hirschkleber-Adhesive.pdf

Georgene
User avatar
dw
Seanchaidh
Posts: 5830
Joined: Wed Jan 01, 1997 10:00 am
Full Name: DWFII
Location: Redmond, OR
Has Liked: 204 times
Been Liked: 122 times
Contact:

Re: Glues and Cements

#179 Post by dw »

Georgene,

Thanks for that. I had never seen the safety sheet. My source was a Goetz rep. But I always did think it might be suspicious.

[hr][/hr]
Without "good," there is no "better," without "better," no "best."
And without the recognition that there is a hierarchy of excellence in all things, nothing rises above the level of mundane.

Tight Stitches
DWFII--HCC Member

[center]Little Jack Dandiprat in a white petticoat,
The longer he lives, the shorter he grows.[/center]
User avatar
dearbone
8
8
Posts: 1032
Joined: Fri Oct 12, 2007 12:23 pm
Full Name: Nasser Vies
Location: Toronto, Ontario, Canada
Been Liked: 3 times

Re: Glues and Cements

#180 Post by dearbone »

Georgene,

Thanks for clarifying that for us,it is good stuff for turning/folding upper edges and heel stacking,if i can get it to stick on a mellow sole for out-stitching,that will be great,but maybe that's a little wishful thinking, i will do a test.
User avatar
courtney
6
6
Posts: 333
Joined: Tue Feb 24, 2009 12:46 am
Full Name: courtney schamach
Location: petaluma, california, u.s.a.

Re: Glues and Cements

#181 Post by courtney »

For all the people that say barge does not hold so good, I can tell you I just spent about an hour trying to get my eva heels off with thinner and heat and knives.

i'm thinking maybe next time I wont glue much in the middle of the heel and just worry about the outside.

Courtney
paul
8
8
Posts: 1038
Joined: Tue Mar 08, 2005 10:00 am
Full Name: Paul Krause
Location: Prescott, Arizona, USA
Been Liked: 14 times
Contact:

Re: Glues and Cements

#182 Post by paul »

Courtney, depending on the thickness of the EVA you're going to use for your heel, you may find that it will stretch and tear in the middle if it's not glued.
Just sayin'.
Thinner will work with the extra ingredients of patience and a pry knife. I'd not use heat on EVA, it will shrink.
Paul
User avatar
jon_g
5
5
Posts: 207
Joined: Wed Feb 18, 2009 10:46 am
Full Name: Jon Gray
Location: Annapolis Royal, Nova Scotia, Canada
Been Liked: 1 time
Contact:

Re: Glues and Cements

#183 Post by jon_g »

Courtney,

Once you've got your heels and lifts worked out you will be happy that they are well cemented.

Jon
User avatar
courtney
6
6
Posts: 333
Joined: Tue Feb 24, 2009 12:46 am
Full Name: courtney schamach
Location: petaluma, california, u.s.a.

Re: Glues and Cements

#184 Post by courtney »

Alright, just trying to think how to make it easier now that I guess I'm going to have to be a shoe repairman too.

Courtney
User avatar
sorrell
6
6
Posts: 320
Joined: Thu Jun 16, 2005 12:00 pm
Full Name: Lisa Sorrell
Location: Guthrie, OK
Been Liked: 10 times
Contact:

Re: Glues and Cements

#185 Post by sorrell »

What does one use to thin rubber cement?

Lisa
User avatar
dearbone
8
8
Posts: 1032
Joined: Fri Oct 12, 2007 12:23 pm
Full Name: Nasser Vies
Location: Toronto, Ontario, Canada
Been Liked: 3 times

Re: Glues and Cements

#186 Post by dearbone »

Lisa,

Usually the place that sell the cement also sell the thinner,I use AP thinner and i buy it from the same place i order my Barge cement.

Nasser
User avatar
romango
8
8
Posts: 854
Joined: Wed Apr 18, 2007 1:40 pm
Full Name: Rick Roman
Location: Eugene, Oregon, USA
Been Liked: 8 times
Contact:

Re: Glues and Cements

#187 Post by romango »

I have used Rubber Cement Thinner found at art supply stores. It's a mixture of hexane and pentane, as I recall. Possibly other things too. It's relativity expensive. I guess you could get by with just hexane, purchased at a hardware store.
1947redhed
2
2
Posts: 78
Joined: Tue Jun 23, 2009 3:59 pm
Full Name: Georgene Mckim
Been Liked: 1 time

Re: Glues and Cements

#188 Post by 1947redhed »

Rubber cement thinner, or depending on the brand, naptha. But since everything has been reformulated lately, best bet is to get the actual brand of thinner for your brand of rubber cement. Barge makes an all purpose thinner that's supposed to thin both all purpose and rubber cement, (or so they tell me at the finder), but I'm still buying up specific purpose thinner and will use the dedicated product until I HAVE to switch.
Georgene
artvanhecke
2
2
Posts: 52
Joined: Tue Jan 11, 2011 9:39 am
Full Name: Arthur Van Hecke
Location: Indian Head, Maryland, U.S.A.

Re: Glues and Cements

#189 Post by artvanhecke »

Hi Lisa,

Rubber Cement Thinner for the brand of rubber cement you are using. This is usually the solvent component of the particular rubber cement. For Petronio's #8 Rubber Cement, you would use Petronio's #8 Rubber Cement Thinner.

Art
User avatar
sorrell
6
6
Posts: 320
Joined: Thu Jun 16, 2005 12:00 pm
Full Name: Lisa Sorrell
Location: Guthrie, OK
Been Liked: 10 times
Contact:

Re: Glues and Cements

#190 Post by sorrell »

Ah, OK. I've been using Barge all-purpose thinner but it doesn't really mix well. My supplier doesn't have a dedicated rubber cement thinner and I didn't know what other alternatives there were.

Lisa
User avatar
sorrell
6
6
Posts: 320
Joined: Thu Jun 16, 2005 12:00 pm
Full Name: Lisa Sorrell
Location: Guthrie, OK
Been Liked: 10 times
Contact:

Re: Glues and Cements

#191 Post by sorrell »

Arthur,
Good to know that Petronio's has a dedicated rubber cement thinner. I've been using Barge rubber cement but since they changed the formula I hate it. I've tried Petronio's and liked it better but didn't realize they actually have a thinner for it. It needs it! It's way thicker than Barge!

Lisa
artvanhecke
2
2
Posts: 52
Joined: Tue Jan 11, 2011 9:39 am
Full Name: Arthur Van Hecke
Location: Indian Head, Maryland, U.S.A.

Re: Glues and Cements

#192 Post by artvanhecke »

Lisa,

I've always used Master Contact Cements and thinner and Petronio Rubber Cement and thinner, almost exclusively after Barge went flaky. Petronio products just seem to do the same thing time after time and work time after time. They seem to be available from almost all of the suppliers. I get mine from Southern. In your neck of the woods Kevin has it at Springfield Leather I think.

Art
User avatar
dw
Seanchaidh
Posts: 5830
Joined: Wed Jan 01, 1997 10:00 am
Full Name: DWFII
Location: Redmond, OR
Has Liked: 204 times
Been Liked: 122 times
Contact:

Re: Glues and Cements

#193 Post by dw »

I guess I go back too far...I remember Barge rubber cement when it was just rubber cement.

Last time I bought Barge Rubber Cement and thinner, I got sick from the fumes (this was after they reformulated...adding MEK).

What's more I didn't like the way it dried or the open time... or anything about it functionally.

Now I buy Elmer's Rubber cement off the Internet (usually cheaper than I can get it from a finder) and I use Bestine thinner I get from Michael's.

Both the Elmers cement and the Bestine smell just like the old Barge did. And behave the way I expect them to, as well.

[Actually Best makes the very best Rubber cement (IMO) but it is expensive.]

Tight Stitches
DWFII--HCC Member

[center]Little Jack Dandiprat in a white petticoat,
The longer he lives, the shorter he grows.[/center]
artvanhecke
2
2
Posts: 52
Joined: Tue Jan 11, 2011 9:39 am
Full Name: Arthur Van Hecke
Location: Indian Head, Maryland, U.S.A.

Re: Glues and Cements

#194 Post by artvanhecke »

DW,

I have a can with Bestine and Best-Test on it. Are these what you are talking about? Both the solvent and cement cost about $12 a Quart. It is from my daughter's art stuff so it might not be the same.

Art
User avatar
dw
Seanchaidh
Posts: 5830
Joined: Wed Jan 01, 1997 10:00 am
Full Name: DWFII
Location: Redmond, OR
Has Liked: 204 times
Been Liked: 122 times
Contact:

Re: Glues and Cements

#195 Post by dw »

Arthur,

Same stuff. I think I get the Bestine a little cheaper but I buy the Elmers in gallons. At a lot less than I could buy a gallon of Best-Test...if I could find it.

Tight Stitches
DWFII--HCC Member

[center]Little Jack Dandiprat in a white petticoat,
The longer he lives, the shorter he grows.[/center]
jshepherd
Posts: 8
Joined: Fri Apr 02, 2010 9:00 am
Full Name: John Shepherd
Location: Nanaimo, BC, Canada

Re: Glues and Cements

#196 Post by jshepherd »

Hi Lisa,

I find that rubber cement works better when it it a little thick. To thin it, I just add more rubber cement from a new bottle once in a while.
User avatar
homeboy
6
6
Posts: 410
Joined: Mon Jan 21, 2008 10:00 am
Full Name: Jake Dobbins
Location: Mountain View, AR
Has Liked: 111 times
Been Liked: 30 times

Re: Glues and Cements

#197 Post by homeboy »

Lisa,

I use Duall 88 rubber cement, but I can't actually remember the last time I thinned it out. It's used pretty darn fast. I usually add more rubber cement to the bottle when low. Sorry....looks like you have your answer above though.
User avatar
dw
Seanchaidh
Posts: 5830
Joined: Wed Jan 01, 1997 10:00 am
Full Name: DWFII
Location: Redmond, OR
Has Liked: 204 times
Been Liked: 122 times
Contact:

Re: Glues and Cements

#198 Post by dw »

Jake,

I didn't know Duall made a rubber cement or are you talking about their all purpose?

Tight Stitches
DWFII--HCC Member

[center]Little Jack Dandiprat in a white petticoat,
The longer he lives, the shorter he grows.[/center]
User avatar
homeboy
6
6
Posts: 410
Joined: Mon Jan 21, 2008 10:00 am
Full Name: Jake Dobbins
Location: Mountain View, AR
Has Liked: 111 times
Been Liked: 30 times

Re: Glues and Cements

#199 Post by homeboy »

Dee-Dubb,

No Sir, it's rubber cement. At least they did make it. It's been some time since I bought any.

I really like it. And as I mentioned, I don't ever remembering EVER thinning any of it.

Still use their all purpose too.
User avatar
homeboy
6
6
Posts: 410
Joined: Mon Jan 21, 2008 10:00 am
Full Name: Jake Dobbins
Location: Mountain View, AR
Has Liked: 111 times
Been Liked: 30 times

Re: Glues and Cements

#200 Post by homeboy »

Stop the presses! I stand corrected!

Got to thinking and actually got up out of my easy chair and went down to the shop. I'm actually using the old Barge Rubber Cement! It's got a pale blue label almost like Duall 88 all purpose cement.

I'm sorry! What can I say.....I'm getting a little senile!
Post Reply